Search results

As above I've bought some gold lca's, but I'm worried now they only fit with the fork type coilovers, as that's the way it appears after a quick search? If anyone could clear this up for me it'd be great, thanks.

Plans are refurb the wheels and red Recaros maybe decat and 98 jdm manifold and a few other bits :-) it has 95k and is in great condition still very shiny red, Only mods atm are 98 spec jdm wheels,spoon drop in filter and spoon n1 [/rquote]

as above guys, anyone have them pm me please, Cash waiting.

Don't know if this is correct section,But basically I am looking to put ITR 98 wheels onto my aerodeck (4x100), Wanting to know what exactly is needed to do so, Ie what exactly I need. Can I still run my own brakes etc or do I need the ITR brakes,hubs,etc. Anyone who knows any help would be great

Have a B18c in my car, But still using the b18c4 loom etc with a p30 ecu, Looking to get an integra 98 ecu (p73). Does anyone know what conversion harness I need? Any help would be great! Thanks

Does anyone know the torque settings for a b18c6 conrod bolts. Do I need to replace the bolts if used before? Engine was recently rebuilt but now I have to fit a different crank so fitting new crank, big ends, main bearings and thrust bearings just need to know the torque settings if anyone...

Basically rebuilt the b18c in my car recently, as the b18c4 bottom end previously was away burning lots of oil etc. Now when rebuilt I used oversized pistons which when only rebuilt the car had issues with flat spots down low. I have since replaced the p30 standard ecu with a chipped one using...

Recently rebuild my B18c6 engine,With oversized .5 pistons now. Since rebuilding it I have noticed between 3-5k RPM theres like a hesitation/flat spot which I thought was a miss so i changed the distributor,plugs and leads. It is still having the same issue,However it didnt do this before the...

Anyone know for sure, Are b18c4 and b18c6 conrods the same ?? Thanks.

I have a b18c4 block at the moment with a type R head.But I am replacing this with a b18c6,I have just recently done the timing belt,But have since been told ill need to replace it again as the belt's are different?Due to short/long blocks? Any help appreciated,Thanks.

Currently have a b18c4 block & b18c head inlet and cams,But going to upgrade the c4 manifold to either a 98 b18c or 5zigen one. Just wondering which is best,Any other suggestion would be great!! Budget is around 200ish? thats the 5zigen manifold there BTW!! Thanks

May be buying a type R backbox from an ep3 for my aerodeck,Only thing is the hangers are different,Just wondering has anyone modified a backbox to fit before & would it be worth while trying to ? Just wanna know how handy it'll be before i buy it! Cheers

Recently i put a JDM '98 Integra head on my b18c4 Block,It had just been fully refurbished,Inc Valve stem oil seals/Skimmed head,New valves etc. Now the car had been using oil and smoking before this,And got recently worse to the point its had oil shoot out the exhaust at high revs. So im...

!!!! Honda Civic EK9 TYPE R !!!! for sale in Clare : €3,200 - DoneDeal.co.uk Just thought id post this in case any of use guys wanted a bargain ek9! Wish i could insure this :angry2:

Have a b18c4 block here with b18c head inlet and cams. What would be needed to go for b20 bottom end?Just block or? And is it worth it??

Going to get H-TUNE to socket and chip my p30 ecu. Currently deciding what basemap/crossover point to go for. Im running b18c4 bottom end,B18C head/inlet/cams. 3inch stainless catback s4c gearbox. Socketing Service - OBD1 ECU (P28/P30) Thats the options above. Cant decide whether to go...

First of all sorry its not a 9 or even ek shaped,Just use the site quite alot so thought id show it off.Hope use like it:) Its a b18c4 bottom end B18C head,inlet & Cams tegiwa induction kit 3inch stainless catback Lowered on apex shocks and springs Thinking of using h-tune to chip my p30...

Have a b18c4 there,With an s9b box,Which im sure your all aware is so long its unbareable lol.. Looking into shorter ratio but s80s are making big money and theyre 4th and 5th is a bit of a let down IMO.. Just wondering anyone any experience using s4c or y21 1.6 boxes on an 1.8 vti?? Thanks

Hi guys just wanted some advice, Recently bought b16b cams for my b18c4. Obviously going to have to have it mapped to suit them,Just wondering with my standard ECU will it need changed or do you run a piggyback etc? Also whats best to go for with map would a raised rev limit as cams are from...

Alright lads been viewing the forum ages never got round to signing up,At the moment driving an aerodeck 1.6,Would love an ek9 but funds wont allow :(.Looking at the moment a b18cR or b16b for my car so let me know anyone selling one!:)