colmbarr1988
New Member
- Joined
- Oct 31, 2010
- Messages
- 95
well folks im stuck in a dark place i had the car dynoed again as its been off the road nearly 3 months due to power issues and im still no better off
its a b16b so on the dyno it is showin that vtec is crossing over at 6k but not takin off till 7.5k /8k
no amount a tunning has helped in this issue
anybody any ideas the work so far to try fix has been ;
new gearbox
new dizzy
new leads
new plugs
new inlet wit sensors/injectors/t.b
new exhaust
new header
new intake
a full head rebuild inc;
buddyclub valves
buddyclub springs
stock retainers
buddyclub spec 3+ cams
new honda oil seals
buddyclub gasket
arp bolts
port and polish
new timing belt
new tensioner
new spring
timing is perfect
oil pressure is perfect
compression is perfect
leak down was perfect
new rad
new fan switch
its a b16b so on the dyno it is showin that vtec is crossing over at 6k but not takin off till 7.5k /8k
no amount a tunning has helped in this issue
anybody any ideas the work so far to try fix has been ;
new gearbox
new dizzy
new leads
new plugs
new inlet wit sensors/injectors/t.b
new exhaust
new header
new intake
a full head rebuild inc;
buddyclub valves
buddyclub springs
stock retainers
buddyclub spec 3+ cams
new honda oil seals
buddyclub gasket
arp bolts
port and polish
new timing belt
new tensioner
new spring
timing is perfect
oil pressure is perfect
compression is perfect
leak down was perfect
new rad
new fan switch
Last edited: