Post your 1/8 - 1/4 Mile Times Here!


hi guys! how fast should a stock ek9 be in the 1/4 mile? 15.3 seems kinda slow. My 2000 Si did a 15.6 bone stock at pomona raceway before. Stock dC2's were doing 14.5. my worst time was 16.1 on a bad launch. So I think it would all depend on driver skills when on the 1/4 mile EK9 vs Si. BTW, I did beat my cousin on his 2000 audi "S4" bi turbo. by tenths of a second only. He could not believe it, was making all the excuses he can think of. That made my day. I beat him coz of my experience at the track. It was his first time. So driver skills make a HUGE difference.
 
i got a 14.9 with
mugen 4-1 manifold
de-cat
standard b pipe
mugen twinloop
js racing ind kit
toyo proxes t1r
 
semi built Twerkd b20 vtec :

b20b block
B16 head spec'd to type r
arias 11.1 pistons
stock rods/bearings
skunk2 pro 1 cams
70mm throttle body
2.5in exhaust w/eletric cutout
hytech header
Hondata s200 ( tuned by church's automotive testing)
91 oct

1/4 mile:13.00 @105.3mph
 
not a honda but i did a 12.7 in my corsa turbo. Road tyres, hot day. approx 320 bhp at the flywheel
 
14.6 in a 106 GTi.

16 16v engine
AX ecu
708 cams
low ratio gearbox - dunno the brand (similar to quaife)
quickshift
group N engine mounts
koni race coilovers with race inserts
group N rally wishbones
OMP strutbar
helix clutch

more built for hillclimbs rather than drag strips...
 
i ran 14.9 1/4 at crail

Spoon 4-2-1 manifold
Spoon decat
Spoon b pipe
Spoon N1
AEM v2
 
1/4 mile 13.850
1/8 mile 9.1

Mfactory final drive 4.928,
Mfactory first gear 3,070
Custom made intake Password:Jdm like
Toyo 205/55/15
Fidanza flyweel
Walbro 255
P28 obd1
Vibrant J spec header
Straight exhaust pipe

Bone stock engine B16B
Bone naked CRX
 
1/8 mile = 9,0824
1/4 mile = 13,9189

SPECS :

81,5 mm 11,5:1 Cp pistons
Crower Maxi light plejlstænger
Crower Springs
Crower retainers
Crower stage2 cams
Spoon valves
RC Engenering 370 CC injectors
OBD2 > OBD1 adapterharness + Ecu med eCtune.
Innovate LC-1 wideband
Edelbrock Victor-X Intake manifold moddet to 70 mm
Heatshield intake gasket
70 mm throttle body
Unorthodox Ultra-SS underdrive pulley kit
Hytech replica manifold
2,5" SS katpipe
Dynomax DNX 2,5" stainless Mid-Pipe
Tenzo-R 2,5" SS rearmufler
Exedy Stage 1 Racing Clutch
Fidanza Flywheel

Stock EK4 gearbox = 4,266 Final drive + no lsd

I am building a new B16 gearbox for the 2009 season, with Quife lsd and a 4,7 final drive

Made on Toyo R888 195/50-15
 
Last edited:
only ran my car at the 1/8 mile ant the last time and i did 7.90.
b20 block,b16 head,b16 tranny,3 angle valve job,port and polish skunk2 intake manifold and head
70mm throttle body,double spring,retainers,titanium valves,skunk2 stage 2 pro series camshafts,milled head 20,000,wiseco high compression pistons 13.5 cr.
exedy clutch stage 5,six sigma headers coming out to the side.bfg drag radials at 5psi.
tein super street damper suspension.
 
Here you go: steve conley's 9.79@150 Video by Ismael - MySpace Video

9.7 @ 150, which is slow. The car in it's current form (running 24.5's) is good for 9.2x's but due to technical difficulties (i.e warped bellhousing, bad synchros/hubs), each time we are about to do it, it just doesn't happen :(

Engine: 2.0l B18 with s372, running Hondata
Power: Sitting at 950whp/600lbft (that's 1150bhp to you UK guys ;))
Transmission: Custom MFactory
Suspension: Custom MFactory/PIC
 
1/4 Mile = 14.02 sec on stock tires.. 13.8 on 16s Advan Neova's AD07
 
Hey.. Just back from crail quater mile, Managed to run a 13.4 @ 106 mph.

Still need to get my 60ft times down - 2.28 secs the best I could do !!!

Cheers, Andy
 
What's your front chassis setup?

Congrats on your new PB, glad our gears are working out for you :)
 
Haribo1187 said:
Hey.. Just back from crail quater mile, Managed to run a 13.4 @ 106 mph.

Still need to get my 60ft times down - 2.28 secs the best I could do !!!

Cheers, Andy
Click to expand...

Nice!, you'll be doing better with some warmer weather too.
 
kaks_EK9Rx said:
Not bad Haribo, whats your spec list again???

Is your 9 been stroked???
Click to expand...

MFactory said:
What's your front chassis setup?

Congrats on your new PB, glad our gears are working out for you :)
Click to expand...

Yeah my car has been stroked mate - M Factory Gears aswell :nice:

My front chassis set-up is bog standard, do you recomend something to get my 60 ft's down ???

Cheers - Andy
 
You must log in or register to reply here.
Back
Top