bisimoto headers


E

ELora

Member
Joined
Dec 5, 2010
Messages
57
Hi everyone!
I swapped b18c spec r last summer and now I want to change my headers for the bisimoto one the big thing I want to know is is it gonna fit without taking out the ac fan?
somebody bought one of those?
 
well thanks guys for the pictures
what do you think about 5zigen headers?
and wich brand you suggest
 
what is the engine spec? where in the power band are you looking for most gains?

lots to consider when selecting a header
 
stevenEK9 said:
what is the engine spec? where in the power band are you looking for most gains?

lots to consider when selecting a header
Click to expand...

actually the engine is stock just a filter on it the original air box doesn't fit
anyway I want more torque I already know that's quite hard to get more torque on that engine but if I can get a bit more I'll be happy with!
so you have a brand to suggest?
for the power band I don't really know I'm still a begginner in that world
I'll say mid range I know that engine is a high rev thing if I can get a bit more in mid to high range it will be great

thanks guys for your help!
 
i have just brought a 5zigen for now, but when i look for more power in the future will be getting a more suitable header.
 
Well a little information about Bisimoto headers: All Bisimoto V2 headers are individually designed and manufacture for our clients and can be found on some of the quickest/fastest street, drag, road race and time attack vehicles world wide. Bisimoto also offers full-ceramic coatings which both the out side and inside is coated with a ceramic coating that will greatly reduce under hood temps and keep the thermal energy within the collector allowing for the kinetic energy of the exhaust gases moving aiding in the scavenging effect and more power to be gained! Bisimoto also offer a 1 year warranty against manufacturing defects.

Bisimoto B-series V2 Header does fit power steering, however they do not fit air conditioning.

Bisimoto H-series V2 Header does fit both AC and PS for Accord and Prelude

Bisimoto D-series V2 Header does not fit either AC or PS

300711_277986082213175_122471854431266_1181651_426125765_n.jpg

302895_278946505450466_122471854431266_1185095_1216571283_n.jpg

39016_101219583267763_100001391643681_5322_787828_n.jpg

0818080004-1-1.jpg

IMG_3746.jpg

dheader.jpg

HeaderB18_2.jpg
 
Aesthetics wise, they win hands down, but from failures to produce results on this forum, I'll never go bisimoto.
 
Ha ha ha omg tama? So just to clarify the headers are not very good?

Lol
 
I agree with Tama. While they look great there not performing and it seems from those who have compared two headers ordered for different setup's both were identical...
 
Bisimoto headers is not for stock engines , you need to have a B16B/B18C/B20VTEC with at least 13.2:1 cr , 300 degrees cams , forged engine and rev about 9500rpm to see what the bisimoto exhaust manifold does in your power against the stock ITR 4-1 manifold or the other ones (toda v2 , tri-Y , rmf , anr)
 
You must log in or register to reply here.
Back
Top