ramboteamjon
Well-Known Member
- Joined
- Apr 21, 2008
- Messages
- 3,010
mmmmmmmmmm weird!
hmm i still cant seem to find mine:? theres nothing to plug it into ? ive already got something plugged into the top of that though?
edit:
ive found it, but its got something connected to the block already?
There is another port in past that which the breather pipe from you I.M goes to
This is my setup
I had the top of the can tapped so I could screw in a fitting and attached a pipercross breather to that. The bracket is attached to the battery tray to avoid drilling into the bodywork. The two hoses attach to the valve cover and the PCV valve (The red thing on the intake manifold or on the black can on the back of the block) although I will be bypassing this in the future directly into the black can.
Correct, should give you plenty breathing for a standardish setup
one hose from rocker to breather
one hose from black box to breather
cap off PCV vacuum on inlet manifold
cap off valve cover breather hole on intake pipe
Only once you go high compression / turbo etc when you need to consider much more advanced breather setups
Pretty sure it's a -8 AN. Push it in tight with some tiger seal on it, Will never come off.i know this is a old topic but what size fitting will fit the blackbox , where the pcv valve was