KmitchEg6
Member
- Joined
- Jun 25, 2013
- Messages
- 220
Well I'm thinking of turbo'ing my B16a2 and I'm hearing good thinks about Go Autoworks so was wondering has anyone on here used there 'street' kit and what are you're opinions??
As of 11/11/11; ALL of our GO-AUTOWORKS Street Kits will come with A/C compatible downpipe options in 2.5" or with a 3" flared choice! All kits will come with the newly redesigned cast manifold for the D and B series. The default base turbo option will be the Turbonetics T3 Super 60 (ideal for 200-325hp builds)
System Contents:
- GO-AUTOWORKS Cast Iron Manifold
- GO-AUTOWORKS SS 2.5" downpipe
- GO-AUTOWORKS 38mm MVS dumptube
- Turbo by Garrett or Turbonetics (see selection list)
- Tial 38mm MVS wastegate (14psi spring combination)
- Tial 50mm blow off valve or Turbonetics Duo 35
- GO-AUTOWORKS Pro Oil Kit
- GO-AUTOWORKS Race charge pipe kit
- GO-AUTOWORKS bar & plate intercooler
- (6) high quality silicone reinforced couplers (black)
- (12) stainless T bolt clamps
The above is what's included what more is needed.
Car will be daily driven.
Also what can the stock internals take I'm hearing different figures any where from 250-400bhp just wondering what's correct..
And if any irish lads read this any suggestions where to fit the turbo/mapping.
Sorry about the long post, thanks for reading!
Kevin.
As of 11/11/11; ALL of our GO-AUTOWORKS Street Kits will come with A/C compatible downpipe options in 2.5" or with a 3" flared choice! All kits will come with the newly redesigned cast manifold for the D and B series. The default base turbo option will be the Turbonetics T3 Super 60 (ideal for 200-325hp builds)
System Contents:
- GO-AUTOWORKS Cast Iron Manifold
- GO-AUTOWORKS SS 2.5" downpipe
- GO-AUTOWORKS 38mm MVS dumptube
- Turbo by Garrett or Turbonetics (see selection list)
- Tial 38mm MVS wastegate (14psi spring combination)
- Tial 50mm blow off valve or Turbonetics Duo 35
- GO-AUTOWORKS Pro Oil Kit
- GO-AUTOWORKS Race charge pipe kit
- GO-AUTOWORKS bar & plate intercooler
- (6) high quality silicone reinforced couplers (black)
- (12) stainless T bolt clamps
The above is what's included what more is needed.
Car will be daily driven.
Also what can the stock internals take I'm hearing different figures any where from 250-400bhp just wondering what's correct..
And if any irish lads read this any suggestions where to fit the turbo/mapping.
Sorry about the long post, thanks for reading!
Kevin.