Teamdiesel
vindiesel
- Joined
- Jul 27, 2007
- Messages
- 155
I haven't been on here for a while but I want to share my new dyno results.
Here is the setup for those of you that don't know:
85.5mm Darton sleeved GSR block
85.5mm Wiseco custom forged pistons (13.5:1 cr)
Crower Max lite billet rods
Crower 92mm forged crank
OEM rod bearings
ACL main bearings
ERL 5 point block girdle
ARP main studs
ARP headstuds
Golden Eagle 86mm headgasket (copper spray coated)
Fully race ported RLZ/Endyne GSR head (85mm chambers)
Supertech springs
Supertech retainers
Supertech black nitrate coated valves
Skunk2 stage 3 cams
Skunk2 Pro cam gears
Skunk2 Megapower 70mm exhaust
Hytech Replica Big Tube header
Mishimoto radiator
B&R valve cover breather kit
Blox Thermal IM gasket
Edelbrock VictorX IM
Omni 70mm throttle body
AEM hi-flow fuel rail
Aeromotive FPR
RC 550cc injectors
AEM hybrid intake manifold
Walbro 255lph pump
ACT HD pressure plate
ACT 4 puck sprung clutch
ACT streetlite flywheel
Mfactory 4.785 final drive
Autometer Cobalt Digital fuel pressure gauge
Autometer Cobalt Digital oil pressure gauge
AEM wideband guage
Hondata S300
Here is a dyno of the last setup that netted a 12.701 in the 1/4 mile with S2S2 cams
Here is a dyno of this setup with some Buddy Club 5 race cams
Here is this setup with the Skunk stage 3 tuner cams (247whp/168wtq)
I am using Skunk Pro3 cams now and will update when I get a few bugs sorted out
Here is the setup for those of you that don't know:
85.5mm Darton sleeved GSR block
85.5mm Wiseco custom forged pistons (13.5:1 cr)
Crower Max lite billet rods
Crower 92mm forged crank
OEM rod bearings
ACL main bearings
ERL 5 point block girdle
ARP main studs
ARP headstuds
Golden Eagle 86mm headgasket (copper spray coated)
Fully race ported RLZ/Endyne GSR head (85mm chambers)
Supertech springs
Supertech retainers
Supertech black nitrate coated valves
Skunk2 stage 3 cams
Skunk2 Pro cam gears
Skunk2 Megapower 70mm exhaust
Hytech Replica Big Tube header
Mishimoto radiator
B&R valve cover breather kit
Blox Thermal IM gasket
Edelbrock VictorX IM
Omni 70mm throttle body
AEM hi-flow fuel rail
Aeromotive FPR
RC 550cc injectors
AEM hybrid intake manifold
Walbro 255lph pump
ACT HD pressure plate
ACT 4 puck sprung clutch
ACT streetlite flywheel
Mfactory 4.785 final drive
Autometer Cobalt Digital fuel pressure gauge
Autometer Cobalt Digital oil pressure gauge
AEM wideband guage
Hondata S300
Here is a dyno of the last setup that netted a 12.701 in the 1/4 mile with S2S2 cams
Here is a dyno of this setup with some Buddy Club 5 race cams
Here is this setup with the Skunk stage 3 tuner cams (247whp/168wtq)
I am using Skunk Pro3 cams now and will update when I get a few bugs sorted out