Buddy Club Racing Spec Condenser


well im pretty sure mine and damiens came with...two small screws to mount the mounting plate to the unit. and three bolts to connect the leads to the unit. no bolt to mount it etc. im just using one of the bolts for the leads at the moment as i have only grounded two wires.
 
hmm, you can just use any generic same sized bolt to fit it. maybe thats what I did, I can't remember lol
 
it will be an M6 bolt with a 10mm head you need,,, approx 10mm long,,
 
hi.

This is iea for plug this stuff for EG5 width d16a9 ?

any HP or Torque up ?
 
supposed to improve idle and maintain Hp numbers especially at top end.
 
Sorry to dig up an old thread, i did not want to start a new one relating to an older topic.

I bought a set of Pivot Raizen Voltage Stabilizer (knock off) but it looks exactly the same and the capacitors are the same. I believe it is made using the same components! (Taiwanese brand called Daizen).
The kit comes with the grounding cable, 5 cables of which I only used 2 because I already have a 8 gauge cable grounding kit already.


Impressions:
Stable idle? - not that i can feel because its already pretty stable after the grounding kit.
POwer - Oh yes, I can def feel it after 5800, when Vtec kicks in the power is smoother, more powerful and def pulls great to 8400rpm.
________
LovelyMonique cam
 
Last edited:
I'm slightly tempted.
But here it costs £94 ($188 USD)
Mhmmmm

ITR-DC2 forum says these are useless........
 
Last edited:
I'm debating whether to get the Buddyclub condensor OR a £50/$100USD Ground Wire Kit (the Same ring terminals as Spoon's earthing kit (Tinned Copper) with 4 awg Opti-braid Cable.)
mhmmmmmmmm
 
I'm debating whether to get the Buddyclub condensor OR a £50/$100USD Ground Wire Kit (the Same ring terminals as Spoon's earthing kit (Tinned Copper) with 4 awg Opti-braid Cable.)
mhmmmmmmmm

they all do the same thing. Just cosmetics. There are some that ARE better but costly.
 
Back
Top