Search results

i have brand new Ferrea Racing valve seals for sell, let me know if interested

hydro shield is just kind of repelent. If you wanna be 100% sure your car dont hydro-lock than go with by pass valve, aem also doing this btw i have for sell new aem hydro shield X-1035RD if you need

13.47s -DC2, 2.0 forged block, stock head, boltons, fw&clutch, Toyo R1R

Tire size calculator here you can see all differences

Be sure you also check the thicknes of wrap, not only lenght and wide. For example, some comes in 1/16" thicknes and some 1/8" - That is 100% difference in thicknes and this should be reflected in price, because if you are buying 15m of 1/8" it is exactly the same like to buy 30m of 1/16" even...

I have "custom intake" prepared to run in my car. I´ve also used blox billet velocity stack, but with JWT filter (since it is not so big as blox one). All i need is get 3" pipe from TB to box, preferable silicone. I know about tegiwa pipe, but it is OEM diameter. So any tips are welcome...

yes there is a bearing which can worn off...you can replace it or simply buy a new fan. Mishimoto products are fine, but i guess cheap fan from ebay will do the same work ;)

90% its battery...Bring battery to some shop for test and recharge. If not and you decide to check the starter, just remove starter by yourself (its very easy, just 2 bolts and 2 connectors) bring it to some garage and do the maintenance. (this is much cheaper than hook car or call specialist to...

hardrace are fine, they are much easier to install and they are @ real good quality

hi, check your battery, maybe it is to low. If batery is OK, then you should check the starter. I had the same problem few days ago.

Well, its not the safe way to run 1.8 ecu on 1.6 engine (and reversely...) this can do piston demage, not only power loss :)

3" is fine even for 2.0 setups.

if you want good tires, you need to pay :) We have ~86gbp for them (15") I am runing toyo R1R and R888. Its quite easy to overheat both tires. R888 gives maybe the best grip on dry surface but not least long. R1R is compromise, universal tire so no problems @ rain and dry surface, higher...

2.0>1.8>1.6 :D Itsnot about torque...you need also power as hell. If torque so much metter, why fabia RS 1.9 TDI with 310nm have worst 0-100 kmh time than 1.5 civic coupe with mighty ~140 nm? The reason why you probably loosing is power curve i guess it is now a bit diffrent than stock (due to...

I have new OEM rings std(81mm) for sell if interested

I am selling these tires in czech. I have to say, thay are good in price/result. We have lack of semi-slicks...so they dont have much competition with "E" tires. They are really good on dry surface, strong sidewall. They dont last long, but what do expect from "race" tire?:) The biggest issue...

cr-mo is much "stiffer" then alu...just take a look at top brands what mats they use on flywheels ;) @ITR - I guess not much difference, if you dont want very light FW, you can get ACT streetlite

just past "OBD HARNESS" on ebay and see the results ;) i have one of them...no problem.

hey guys, any other close colors? I would like to paint my rims in bronze :F

I have OMP FAST, looks great, cost ~70pounds in my country. There is no problem of visibility...also good if you have very loud car :)