Quick question on my Ek9?


Jake Renton

New Member
Joined
Aug 17, 2016
Messages
9
Car(s)
Honda Civic Ek9
Hello,
after a couple of months of having my Ek9 relatively loud, I want to go quiet again. So I'm looking for some quick advise on gasket sizes, I am having to order them online (Tegiwa) as no garage around me stocks import car parts.
So, I'm needing a gasket from the:
- manifold to the catalytic convertor
- catalytic convertor to the B-pipe
- B-pipe to the backbox
Could some one please let me know which to order? I think I need: 1x 3 bolt, 1x 2 bolt, 1x donut :all at 2.5"?
Its all standard OEM parts going back on if that helps?

Many thanks,
Jake
Enlight1.jpg
 


Buckyy

Active Member
Joined
Jul 2, 2014
Messages
259
Between axle back and mid section doughnut gasket and 2x12mm bolts and nuts

Between mid section and cat triangle gasket with 3 holes and 3x12mm bolts and nuts

Between cat and manifold another doughnut gasket and 2x12mm with springs and corresponding nuts

Then if your feeling plush change your nuts and bolts holding your manifold to the engine block, old ones can snap when taking off so make sure there fresh

All parts should be available through dealer or Tegiwa...make sure gaskets are 2.5 inch application for EK9

Also wrong section
 


Top