Quick clean!!!


Few days of dry weather so got myself motivated and fitted my Fujitsubo RMO1A and also done an oil change whilst i was at it.

Really happy with noise level and tone of exhaust as i dont like them too loud, my APEXI exhaust was leaking in few places and what a difference putting on a new exhaust made :drive:



 
This car just get better every update. I like the work emotions on it, if there going to be for sale ever give me a shout as iv a genuine vti-s ek4 I think they would look well on. Rmo1a a top exhaust, love the sound of mine, b18 fills it well :)
 
Cheers Stu, and if I decide to sell the works I will give you a shout, actually be taking them off soon to put the Rpf1's back on for the better weather.

Yea the Rmo1a is deffo a nice soundtrack.
 
Looking good as always mate. Such a clean car and new exhaust looks some job.
 
Looking as clean as ever, is the BWR rad holding out well? It looked well made when I seen one that you had a while back

The exhaust looks great, I have always been a fan of huge RM01A
 
SPek9 said:
Looking as clean as ever, is the BWR rad holding out well? It looked well made when I seen one that you had a while back

The exhaust looks great, I have always been a fan of huge RM01A
Click to expand...


Yes Steve had no probs with the bwr rad at all since fitting, being power coated black im sure its easier kept clean.
 
Not been up to much lately, fitted brand new oem fog light kit and got rid of my depo yellow set as they had it...
$20140526_152545.jpg

Was the clear glass fogs I fitted but think the yellow ones suited my car so I put some yellow film over them.....
$20140529_155731.jpg
Can easy be taken off as such.





As you may see I fitted my RPF1's again for the dry weather and gave car a machine polish.
 
Last edited:
Thought i would make up a full spec as i have never listed it before so here goes.....

ENGINE/ MODS

B18C6 BLOCK, FULLY REBUILT WITH OEM GASKETS/SEALS ETC
NIPPON ITR PISTONS (81.5MM)
B16A2 HEAD, FULLY REBUILT WITH OEM GASKETS/SEALS AND LIGHT PORTING
ITR CAMS
ITR DUAL SPRINGS/RETAINERS
ITR FUEL RAIL
BLOX INTAKE MANIFOLD
ITR 62MM OEM TROTTLEBODY
MUGEN INTAKE (I HAVE OWNED THIS FROM BUYING NEW)
FUJITSUBO RMO1A CAT BACK
SARD DECAT
MAXIM WORKS 4-2-1 MANIFOLD (HEAT WRAPPED WITH THERMOTEC)
MISHIMOTO RADIATOR HOSES
BLACKWORKS BLACK EDITION ALLOY RAD
BLACKWORKS TEMP ADAPTOR
NGK BLUE SPARK PLUG LEADS
ITR S80 GEARBOX (4.7 FINAL DRIVE)
ITR SHIFTER LINKAGE WITH OEM ITR DUAL BEND SHIFTER
HEL CLUTCH LINE
HARDRACE ENGINE/TORQUE MOUNTS
BAFFLED SUMP PLATES
SPOON REFLECTIVE HEAT TAPE ON SUMP
MAPPED ON "CHROME"

ENGINE BAY

POWDER COATED BLUE ROCKER COVER
BWR OIL CAP
BWR RAD STAY
SKUNK2 SOLENOID COVER
SKUNK2 BATTERY TIE DOWN
CARBING COOLING PANEL
BONNET DAMPERS
VARIOUS DRESS UP WASHERS


SUSPENSION/BRAKES/WHEELS

ENKEI RPF1 16X7 / WORK EMOTION CR 16X7
RAYS LUG NUTS/ WORK LUG NUTS
SPOON SHOCKS ALL ROUND
UNKNOWN JDM SPRINGS (APPROX -50MM)
CUSCO FRONT STRUT BAR
MIRACLE X BAR
EK9 BRAKE MASTER CYLINDER SET UP (1")
282MM EK9 FRONT CALIPERS
282mm 4X100 MTEC GROOVED FRONT DISCS/ HAWK PADS
262mm REAR CALIPERS
262mm 4X100 REAR DISCS
HEL BRAIDED LINES ALL ROUND
BLACKWORKS REAR TOE KIT
BLACKWORKS BILLET LCA`S
BLACKWORKS BILLET LOWER TIE BAR
WHITELINE 18mm REAR ARB


EXTERIOR

OEM HONDA EK9 HEADLIGHTS (PIAA HEADLIGHT AND SIDE LIGHT BULBS)
OEM HONDA SI 99-00 GRILL
OEM HONDA SI FRONT AND REAR EMBLEMS
OEM HONDA FOG LIGHT KIT
OEM HONDA DOHC DECALS
OEM HONDA REAR "SHARK FINS"
OEM HONDA CLEAR WING INDICATORS
OEM WIND DEFLECTORS
OEM EK9 REAR CRASH BAR
OEM HONDA REAR WIPER DELETE
OEM HONDA ARIEL DELETE
RAIN X WIPER BLADES
JAZZ WASHER JETS
SPOON CARBON SPOILER (GEN 1)


INTERIOR
RED RECARO`S (ALWAYS COVERED UP WITH COVERS)
OEM ITR REAR SEAT SET UP
OEM EK9 BEZEL SURROUND
OEM EK9 STEERING WHEEL
OEM EK9 INTERIOR VISORS
GREDDY GAUGES X3 IN LOWER DIN TRIMMED WITH CARBON
OEM ITR JDM MATS
OEM EK9 RX PEDALS
OEM EK9 AUTO UP WINDOW SWITCH
MUGEN GEAR KNOB (BALL TYPE)
ALPINE STEREO
ALL SPEAKERS UPGRADED
OEM TWEETERS UPGRADED
CLIFFORD ALARM

pic of car today....

Damm sun.


Im sure ive missed some things but will edit as i go :nice:
 
Last edited:
such an awesome car. glad too see you still have it :nice:
 
689R said:
such an awesome car. glad too see you still have it :nice:
Click to expand...

Thanks buddy, owned this car over 10 years now and bought it totally stock.

Lots of time/money thrown at it so will be a sad day if i decide to sell up especially with it being a limited edition colour, you would see more ek9`s about than a VTI in this colour tbh.
 
Serious example you got there man. I think I've said it before but I'll say it again. That car is mint :nice:
 
U cud easily see how well looked after this car is! This build is My inspiration. 10 years! Wow... Id love to keep a car that long!
 
You must log in or register to reply here.
Back
Top