Not an Ek9 but hopefully your all like it.....


FullRaceB20

FullRaceB20

Member
Joined
Nov 21, 2008
Messages
126
Hey guys this is my 2000 Civic Turbo, which is currently for sale also -

Engine -

Benson sleeved 83mm B20 block
89mm Benson balanced and micropolished crank
CP 9-1 pistons/rings, Eagle 3/8 rods, ACL bearings
New OEM oil pump, new pick-up, new waterpump
ARP head studs and Cometic head gasket
New SuperTech valves, dual springs and titanium retainers
B16 VTEC head with 3 angle valve job, new seals, surfaced, all done by
PortFlow
Vti intake and exhaust cams, AEM 5 bolt cam gears
New STR fuel rail and new 1000cc RC Injectors
Edlebrock Victor X with stock throttle body, sensors and vtec selenoid
Oil pump adaptor with ls/vtec line in place
Motec Coil Pack and new spark plugs
New timing belt, harmonic balancer
Brand new alternator
Driveshaft shop stage 3 driveshafts
Motec M4 pro ECU mapped at Owen Developments
PWR Radiator
x2 catch cans

Turbo Kit -

Full Race Pro-am manifold
Full Race 3'' Downpipe
Full-Race Intercooler
Full-Race T3/T67 H.O. Turbo
Tial 44mm Wastegate
Tial 50mm Blow Off Valve
Full-Race Intercooler Piping
Full-Race Oil Line Kit
Full-Race Vacuum Line Kit
Full-Race Hardware Kit
Full-Race Gasket Kit
Full-Race Silicon Coupler Kit
Full-Race Hose Clamp Kit
Thermal Research and developments 3'' Exhaust

Chassis -

Tarox Discs
Braided Hoses
Greenstuff Pads
Motul Brake Fluid
Full Race Traction Bars
Eibach Springs
KYB AGX Adjustable dampners
CTR Rear anit roll bar
15'' Rota rims with Toyo R888's tyres all round - plenty of tread left

Gearbox -

ACT Flywheel
Clutch Masters Stage 4 clutch


Interior -

Cusco a/b pillar bars
OMP sterring wheel
Mocal boost gauge
Carbon Gear Knob
SPA oil temp/pressure gauge

The car is running 520bhp and 288lbft at 1.1 bar.

dsc03345be5.jpg


dsc03344lt6.jpg


dsc03343kn7.jpg


dsc03342ua6.jpg


dsc03339pm8.jpg


dsc03347dz6.jpg


dsc03348jn1.jpg


dsc03349dk5.jpg


dsc03350bb7.jpg


dsc03351hf9.jpg


dsc03352ud0.jpg


dsc03355sa4.jpg


dsc03356jg6.jpg


dsc03357sg8.jpg


dsc03361ug4.jpg


dsc03365xn4.jpg


dsc03367zy1.jpg
 
beautiful!

congratulations, great car :)
 
that is great! Wouldnt expect it to have that sort of power rolling up next to it! nice one.....
 
Thanks for the comments guys, im looking for £10,995. I have recipts for every part purchased, fitted and setup. Will be ashame to see it go but other prioritys have taken over unfortunately!!! : (
 
yeah man big fan of this myself, looked better on the BBS's tho dude imo, cant belive it still aint sold.
 
is this going around the ringwood area in dorset? ive heard a couple of things about this machine:nice:
 
Appreciate the comments guys and yeh it lives around the Ringwood area. Its a great car and surprises so many people looking so standard.
The BBS's were a better looking wheel but as far as performace/handling the Rota's are lighter, wider and equiped with better tyres are a much better combo.
 
I remember this off CSC, great car, glad its still about.
Bet you suprise so many people on the motorways :D
 
520bhp at 1.1 bar is impressive, loving the dump valve (that looks like a waste gate) on the side of the cooler, never seen that before, take it you have it welded into the side of the cooler and then the pipe work goes into the cooler close to it as opposed to the dump valve being mounted on the pipe work.
good luck with the sale fella must be crazy fast!!
 
Thanks for the comments guys, yeh the car was in Banzai last year and on there stand at Jap Performance show at Silverstone also.

JDMdude - Its a dumpvalve on the end of the intercooler, piping runs from the back of the intercooler to the turbo. It also had a wastegate which is connected to the manifold just before it splits into the downpipe.
 
sweet ride shame your selling it! what sort of price are you looking for it?
 
Will be sad to seem it go its so much fun and is a pleasure to drive normally or with a heavy foot.
Price is £10,995 ono
 
Last edited:
remember this off CSC aswel when it had the BBS lovely car and a absolute beast!!! where did you get the cusco side brace things ? ? only ever seen them on your car and ONE other EK9.. would love to get some if you wanna split :p
GLWS aswell whoever has that is gunna be chuffeeedd!!! :D
 
Thanks dude.
The Cusco b-pillar bars were purchased along long time ago and i forget where i got them now! Il have a look on the recipt at home and let you know
 
You must log in or register to reply here.
Back
Top