My DC2 Race Car Now K20'd
- Thread starter robbyp
- Start date
always thought about doing this with mine
Theres a lot of work in it buddy and it costs alot of money as well theres no doubt about that. There is some gains over the standard b18 setup but weather its all worth the time/money/effort in the end is a close call in my opinion.
looking good buddy
Cheers guys hopefully be back on track in a couple of weeks
Havent updated in ages on here!
Been doing a few mods on rear bumper, trimmed part of the bottom of the rear bumper away to let the air escape a bit easier i hope lol. Not sure if you'll be able to notice from this picture
Also de-stickered the car and polished it up, Hopefully get some new graphics sorted out for this year
Been doing a few mods on rear bumper, trimmed part of the bottom of the rear bumper away to let the air escape a bit easier i hope lol. Not sure if you'll be able to notice from this picture
Also de-stickered the car and polished it up, Hopefully get some new graphics sorted out for this year
Also been trying to replicate something like the golden eagle Rear bumper vents to help let the trapped air escape
from the back bumper. I've only made a template from paper at the minute of what it should be like to try it on.
The bumpers only sitting on there and the same with the template so its not 100% right but you get the idea i guess you can see the piece ive cut from the rear bumper pretty well in the last pic. Left the center bit alone as it meets the boot floor pretty flush so didnt see the advantage there. Just need to get material to make the vents out of and go crazy cutting it out and holes in the bumper ).gif ":)) :))")
from the back bumper. I've only made a template from paper at the minute of what it should be like to try it on.
The bumpers only sitting on there and the same with the template so its not 100% right but you get the idea i guess
you can see the piece ive cut from the rear bumper pretty well in the last pic. Left the center bit alone as it meets the boot floor pretty flush so didnt see the advantage there. Just need to get material to make the vents out of and go crazy cutting it out and holes in the bumper Thanks
there's plenty of better cars about in my opinion but I have put a lot of time and money into this one so its nice to hear.
Well got couple of pieces of alloy today so marked them out
I cut them out and then drilled in place to the bumper.
Once I had it located on the bumper I marked the piece of bumper to be cut out and then it was air hacksaw time
And the left over bits
This is how it looks now, just need to paint the metal vent and pop them on
I cut them out and then drilled in place to the bumper.
Once I had it located on the bumper I marked the piece of bumper to be cut out and then it was air hacksaw time
And the left over bits
This is how it looks now, just need to paint the metal vent and pop them on
