Little bit of an update, haven't had chance for a while with work being stupidly busy and just not having to motivation to push on with the car buttt.. Managed to get some things done.
After swapping back to OEM pedals and servo/mc's because the pedal box was turning into the biggest nightmare
I've bought a tilton lever bias valve.
The ktuned shifter box seemed like the perfect mount for it, so I drilled and tapped the side of it (sorry ktuned) needs must!
Brake lines routes away from the exhaust manifold as best I can
Finally decided what I wanted to use as a switch panel..
Fitted up, nice and close to the driver
Water plate to the electric water pump line made up.
Hate carbon wrap, but actually looks decentish as a roll cage protector
Drilled and tapped the Titan throttle body manifold for a vacuum port, ready to run the lines to a vacuum manifold for the booster and possibly a map sensor, not 100% if I want to run one yet
Got on with a lot of the wiring, got the main chuck of battery/killswitch/alt/starter sorted. Just need to figure out what I'm doing with the rest yet.
Fia rain light and its switch terminated
Completely remade custom Headlight loom, pretty much sorted.
One of the main power wires to the rywire standalone fuse box.
Gauge loom terminated
Started to make up a fusebox/relay panel for all the aux stuff like lights, wipers, external fuel pump, water pump, etc etc
First rough go. Think I need to actually make a proper mount plate and find where it's going to go in the car before I go any further, so I know what I'm working with.