Alright people, i need some help. Almost a year back now i managed to blow up my B16b block so i bought everything needed to rebuilt a B18c bottom end. The car has sat outside my house since i eventually got everything needed to rebuild it. Now that ive rebuilt it all and fitted back into the car its not wanting to start.
It turns over.
It gets fuel up to the rail but i'm unsure if the injectors are firing.
It gets a spark.
I've checked the timing and its bang on.
I done a compression test and they are quite low, there all round about 160.
Heres the the list of bits that i bought for the bottom end - B18c bottom end parts
My original EK9 head got new stem seals, valves reseated and also resurfaced.
I need some help from you guys big time angry2:
It turns over.
It gets fuel up to the rail but i'm unsure if the injectors are firing.
It gets a spark.
I've checked the timing and its bang on.
I done a compression test and they are quite low, there all round about 160.
Heres the the list of bits that i bought for the bottom end - B18c bottom end parts
My original EK9 head got new stem seals, valves reseated and also resurfaced.
I need some help from you guys big time angry2:
Last edited: