I was looking at that today thinking the same thing, was going to ask you!Another thing I forgot to mention about those pistons. You'll need to bend the oil squirters to clear the piston skirt. Just a careful slight bend in them is enough but be sure to double check when the rotating assembly is all fitted.
Ah cool man, no worries when ever you get time to look.That's it 30 thou. Yes the piston comes down further. You'll notice the bottom of the skirt pokes out the cylinder at bdc.
I MAY (very big may) have a set pre bent I pulled from a block I got once. I've been meaning to sort out your cooler pipes but had my own little fiasco going on this week.
You just need a big plastic storage box and a sander !
Small version
Yeah mine ended up in an acid bath a few times. Just needs to be clean as you can get it. Not down to a bacteria level but dirt etc
Back to the waiting and and andNo unfortunately not yet
It was a parcel coming from closer to home, but it would appear that the courier didn't collect the parcel!!!