flybikeslee
Active Member
- Joined
- Aug 20, 2008
- Messages
- 603
just finished doing this so thought id do a little tutorial for anyone else wondering how...
the rear bolt directly in where the old civic ones come from, anyone can manage that one. 6 10mm bolts. you can then use the original backing off you old seats to go over the teg item
if you fit the bottom teg bit you can see from the pic below it leaves a reasonable gap
so its a case of taking the fabric off the teg one and fitting it to the base from the civic seats.
so obviously take it out, look underneath and you'll see lots of metal hoops all the way round. you will need to cut these off on both benches to get the material free, note there are also some running down the contours of the seat
comparison of the two (teg bottow civic top)
so then you need to start stretching the itegra material over and the civic bench is wider/taller. attach through thr existing holes with cable ties to keep secure
it takes some fiddling to get perfect
and fitted back in
the rear bolt directly in where the old civic ones come from, anyone can manage that one. 6 10mm bolts. you can then use the original backing off you old seats to go over the teg item
if you fit the bottom teg bit you can see from the pic below it leaves a reasonable gap
so its a case of taking the fabric off the teg one and fitting it to the base from the civic seats.
so obviously take it out, look underneath and you'll see lots of metal hoops all the way round. you will need to cut these off on both benches to get the material free, note there are also some running down the contours of the seat
comparison of the two (teg bottow civic top)
so then you need to start stretching the itegra material over and the civic bench is wider/taller. attach through thr existing holes with cable ties to keep secure
it takes some fiddling to get perfect
and fitted back in