- Joined
- Jan 29, 2008
- Messages
- 6,259
Hello guys and girls
Just out of interest because i'm a bit to it with the clearance i've got.
Test fitted my Spoon calipers with my 15" Rota slip streams and the Spoon writing on the calipers to back face of the rims is very very small its making me I estimate that its only 1-2mm
Is this safe?
The caliper is not using any washers as that will push it closer to the rim so hopefully my pads are worn enough that the caliper will still fit over the disc if not slightly offset. As per this http://www.spoon.jp/dl/45020-EK9-G00_EG.pdf i just haven't put that washer in to allow more clearance.
Also why you can't use standard bolts i don't know the stock ones are fitting mine fine??? Any one else?
Just out of interest because i'm a bit to it with the clearance i've got.
Test fitted my Spoon calipers with my 15" Rota slip streams and the Spoon writing on the calipers to back face of the rims is very very small its making me I estimate that its only 1-2mm
Is this safe?
The caliper is not using any washers as that will push it closer to the rim so hopefully my pads are worn enough that the caliper will still fit over the disc if not slightly offset. As per this http://www.spoon.jp/dl/45020-EK9-G00_EG.pdf i just haven't put that washer in to allow more clearance.
Also why you can't use standard bolts i don't know the stock ones are fitting mine fine??? Any one else?