at some point I'll be fitting my new wheels, which have a centre bore of 58mm, will I need spigot rings for these?
thanks
Yes! You will need one thats 56.1mm inner diameter and 58mm outer diameter.
Yes! You will need one thats 56.1mm inner diameter and 58mm outer diameter.
quick question !, got an 2000 ek9 , and i got some wedsport wheels and the outter is 73.1 is the inner still going to be 56.1 as i will order that size
also are they really needed i can see what there for of course but what will happen if you dont run them ?
quick question !, got an 2000 ek9 , and i got some wedsport wheels and the outter is 73.1 is the inner still going to be 56.1 as i will order that size
also are they really needed i can see what there for of course but what will happen if you dont run them ?
Yes 56.1mm for the inner diameter to suit the civic hub.
I doubt you will see anything happen unless you hit a kerb or pothole .. in an accident they maybe the difference in the wheel staying on or off the car
LAME my ek9 is 5x114.3 so i got the 56.1 and they didnt fit looks like im gonna have to try gobas attempt and go for 64.1 will let you know my outcome
Don't worry too much just tighten each nut hand tight to make sure wheel is centred then torque up.
I never use them.
Dunx