what engine am i running???


konradinu

**** cosworths
Joined
Mar 22, 2009
Messages
216
Well since the day I've bought my car i never got to know what my real engine code is . Don't get me wrong i know its a d15b non vtec but the thing is what is the engine code d15b.....??? On the blue plate you find when you open the hood I find type - Ri . The car is a 98 civic hatch non vtec . My prob is that when ordering stuff i don't know if it will fit because i don't know the full engine code.
140820091187.jpg


Any one knows?? 10x
 
the engine code is stamped on the side of the block as is every honda engine. on yours it will be on the left of the block next to the exhaust manifold just below the coolant outlet.
 
Look at the number at your block...like civicsport said. Thats the engine you have.
 
It will be what it says, 9/10 unless it looks like its been carved on. What ecu is it running ? If you can find the ecu open the case and see if its been chipped.
 
I think this is a d16y7

D16Y7


  • Found in:
    • 1996-2000 Honda Civic DX/VP/LX/CX
    • 1999-2000 Honda Civic Special Edition - SE(Canada)
    • 1996-97 Honda del Sol S
    • 1997 Honda Civic Coupe LSI
      • Displacement : 1,593 cc (97.2 cu in)
      • Bore and Stroke : 75 mm × 90 mm (3.0 in × 3.5 in)
      • Compression : 9.4:1
      • Power : 106 hp (79.0 kW, 107 ps) @ 6400 rpm
      • Torque : 103 ft·lbf (14.3 kg/m, 140 Nm) @ 4,600 rpm
      • Redline : 6800 rpm
      • Rev-limiter: 7200 rpm
      • Valvetrain : SOHC (4 valves per cylinder)
      • Fuel Control : OBD2 MPFI
      • Head Code : P2F
      • Piston Code : P2E
      • ECU Code : P2E
 
Spot on :nice: Good info .

I have that motor on my EJ6 , check it out.

5338d1232252220-my-1998-ej6-project-dsc_5802.jpg


I'm pretty sure we're running the same motor :) the only difference I see is that you don't have the complete air box.,..
 
got a pic of the engine code
 

Attachments

  • $031020091273.jpg
    $031020091273.jpg
    376.1 KB · Views: 462
no thats 100% a d15b pretty certain they run the same head as the d16y7 but just a 1.5 block
 
you think a d16y7 would have a better cam than a d15b. or would it be better to get a head off a d16y7
 
Back
Top