hi again guys am guessing ma budget would be around 4k
ok, well thats not a bad budget, here is what you will need and the parts i recomend:
-turbo manifold like Meutek
-a turbo, something like a GT3071R
-downpipe
-intercooler and piping
-a wastegate like a tial 38mm
-a bov like a tial 50mm
-fuel injectors 750cc RC should be good.
-some sort of ems like: AEM, hondata, Fcon, Power FC.
-uprated fuel pump like walbro 255lph.
-boost gauge anything but autometer they are junk!
not needed but highly recomended:
-fuel pressure gauge
-arp head studs
-a thicker head gasket to drop the compression or low compression pistons.
-to keep cost down you could have the intercooler piping and downpipe custom made at a muffler shop.
-3" exhaust.
here is a list of what i used on my old setup just for refrence:
-meutek turbo manifold (flat black ceramic coated) from
www.meutek.com
-turbonetics ball bearing t3/t04e turbo from
RaceSpecialists.com (flat black ceramic coated)
-custom 3" v-band downpipe (flat black ceramic coated)
-KMS-FAB 5-bolt to v-band adapter
-custom intercooler piping (flat black ceramic coated)
-PWR intercooler
-greddy type RS bov from
RaceSpecialists.com
-Tial 38mm wastegate with custom extension neck and dump tube (flat black ceramic coated)
-AEM EMS stand alone engine management system with build in uego
-AEM serial data gauge
-ARP head studs
-3" exhaust
-greddy oil block adapter
-greddy oil catch can
-spal slim fan
-aftermarket 2" radiator
-750cc RC fuel injectors
-walboro fuel pump
-NGK BKR7EIX iridium spark plugs
-stock head gasket
-stock exhuast manifold gasket
-hondata intake manifold gasket
-ACL rod/main bearings (engine needed fresh bearings due to accidental over-rev)
my new setup has the following parts upgraded:
-turbo is now a GT3076R
-intercooler is now a APEXi GT spec
-WasteGate is now a Tial 44mm
-Manifold is not Equal lenth
-BOV is soon to be upgraded to a Tial Q 50mm.
you can see pics here:
http://www.ek9.org/forum/forced-induction/2384-my-new-turbo-setup-pics-inside.html
http://www.ek9.org/forum/forced-ind...my-turbo-b16b-build-log-opinions-welcome.html
i may be selling my old parts in the future if your intrested, the turbo is currently being rebuilt by turbonetics...