Spoon Brakes and 15" TE37s


te37 15x6.5 +45 you'll need a 6-7mm spacer and bit bigger studs.
 
can you not run like upto 15mm spacers without changing the studs?

does noone on this site have this combo? can give me actual experiance rather than just hearsay
 
i thaught i saw something with having to space or do somthign as the callipers dont just bolt on like the oem ones or i could have heard wrong from the looks of it...
 
hondafan said:
i thaught i saw something with having to space or do somthign as the callipers dont just bolt on like the oem ones or i could have heard wrong from the looks of it...
Click to expand...

Yes they do lol. Use all OEM fittings etc.

The problems people have is like what Im going to have, wheel fitment.
 
with 5-7mm spacer you can run it without studs but its a bit risk ,to be safe i changed it with other honda which was around 6mm bigger,with 10mm spacer and above you'll need for sure bigger studs

below is some studs you can order :

Front TL Studs: 90113-SD4-902 BOLT +6mm
Rear TL Studs: 90113-SD2-005 BOLT +12mm
NAPA 641-2791 +10mm
 
Do I need to get new brakelines for these or I am fine running standard ones for now?
 
Right cool.

01122009088.jpg


wee pic of them for youz
 
Im gonna sell the 5 lug setup met. try to claw some money back haha
 
I will try haha.

On topic, Thom(e-eg6) said that his same spec as mine TE37s fitted with his spoon brakes with no spacers. Happy days.
 
Luck bass if you don't have to faff about with spacers

Although saying that, running the front wheels spaced out for a wider track feels good for me so far! but the oem wheels are pretty weak offset/width wise anyhoo :)
 
Here

Il sell you some of these if your keeping the 5 lugs

I got a set in 5x114.3, they need refurbed etc but aye

Forged SSR's, Rare as a ****ing ****

yhst-1408381693991_1888_151930
 
Last edited:
You must log in or register to reply here.
Back
Top