Removing a deep scratch in carbon fibre?

[Scottek]

Got this scratch on my bonnet.

I'm pretty sure it's just scratched the laquer. How can I get this out? Would I be able to use a fine grit wet n dry then polish it or will that ruin it?

Thanks.

 

[cfcDUFFYcfc]

x2 i also have a small scratch on my carbon duckbill spoiler.
surely there's away to fix small scratches.

Duffy

 

[jfatboy]

x2 i also have a small scratch on my carbon duckbill spoiler.
surely there's away to fix small scratches.

Duffy

wet sand it low, then polish it out. if its too bad take it to a body shop.

 

[type-r-dunk]

I found the best way is to thin down some touch-up lacquer, keep touching it up till scratch is raised up. Then flat back with some 2000 grit wet/dry, 3G polish, finishing polish = job done.
Dunx

 

[Vtec-K]

i heard lacquer and some compound does the job

dont hold me to that tho as iv never tryed it

 

[Scottek]

Cheers I'll give it a go

 

[egcmikey]

I found the best way is to thin down some touch-up lacquer, keep touching it up till scratch is raised up. Then flat back with some 2000 grit wet/dry, 3G polish, finishing polish = job done.
Dunx

I have repaired deep scratches in paint this way, works a treat! The key in this taking your time, allowing the paint/lacquer to harden fully before doing anything!