relocating fuse box


I've done this on my car, I removed the passenger air bag to do this though, it's abit if a faf but well worth it, you'll need to extend the wires run them through behind the wing and through the bung which the indicator goes through, also the White main pier wires will need extending I just bought some wire from the electrical store and crimped some new connectors onto it and chucked the old ones,

MAKE SURE YOU DO ONE WIRE AT A TIME!!!
a and solder them not crimp the wires together ;) just to make sure there is a good conection ;)

also you may need to partialy pull the dash out to fit it properly

hope this gives you an idea of the type of job it is lol
 
i've my battery in boot already. I was lookin at it today and the wires come true firewall and go into fuse board obviously but the other little bit on that loom is for abs. I've that taken out of my car so i can jus pull wires in a relocate fusebox without rewirein so all's good. Has anyone got wire loom on driver side hidden?
 
tango'dcivic said:
i've my battery in boot already. I was lookin at it today and the wires come true firewall and go into fuse board obviously but the other little bit on that loom is for abs. I've that taken out of my car so i can jus pull wires in a relocate fusebox without rewirein so all's good. Has anyone got wire loom on driver side hidden?
Click to expand...


Good stuff man! Any chance you can PM me a few pics of the battery relocation? Might give me a few ideas on how to do it!

Working on the drivers side now too so will keep it posted with pics!

Cheers man!:nice:
 
You must log in or register to reply here.
Back
Top