Power Neo Installation on a EK9 Honda Civic Type R

[rvm]

Lets start with information about the power neo...

Power NEO by Top Fuel Zero 1000 uses the heat-resistant Neodymium magnet which has the highest magnetism in magnet. The power of the magnetism decomposes the molecule of gasoline into an ultra fine particle. The decomposed gasoline becomes perfect for combustion. Therefore, explosive power rises. Perfect combustion is the foundations of tuning. There are five fundamental effects in Power NEO. It - power, torque, response, mpg, and exhaust gas - being pure . According to the effect, the tuning rise of your car is carried out synthetically. Installation is very easy, simply clamp it onto a fuel pipe. Power NEO can be installed on a gasoline engine or a diesel fuel engine. A preeminent effect is also on black smoke reduction and the quiet disposition of a diesel engine. All necessary tools is included


Power NEO changes gasoline into an ultra fine particle for better engine combustion.


- Mpg: Improve an average of 5 to 30%.
- Purer exhaust gas by carbon monoxide reduction is expectable.
- Reduction and a quiet action of the black smoke of a diesel engine.
- Upgrade effect of engine.
- Torque rise effect of engine.
- Response rise effect of engine.
- Ignition time can be set forward by the explosive power rise of engine.
- An effect is further expectable in the car in which Big Injector is installed.

Installed on the B16B, the photos speak for themselves

 

[blinx9900]

but the question is... does it work?

 

[SpoonCTR]

but the question is... does it work?

Yes it does, is very common in Japan

 

[blinx9900]

but does anybody on this site have one? i wanna here from an owner.

 

[rvm]

but does anybody on this site have one? i wanna here from an owner.

I don't think so, I posted this just for future reference

 

[jugbugz]

It's just an extremely powerful magnet that ionizes the fuel and finely breaks up the fuel particles etc etc. Which will create a better burning efficiency and less unburnt fuel.. I've got a couple of generic brands on mine and I can't feel the difference. If it's scientifically proven then should be good.

The more of these on your fuel lines the better. But you can't install them on a rubber fuel line. It needs to be on a metal fuel line to work.

 

[vtecroadhog]

looks like an intersting gadget...sure it wont come cheap if it really works..?

price details etc...anyone?

 

[jugbugz]

ebay mate, hahaha. Not expensive, unless you want to use power neo...

I've also heard that Infra Red radiation in a tube wrapped around the fuel lines would work many times better than Magnet. Magnet also looses it's force over time and with heat.

 

[Amaury_Reno]

it works well when engaging vtec

 

[bosniacrx]

Ionization, as to my knowledge is subtracting or adding electrons from the atoms that forms molecules. It can happen also when separating atoms and molecules. But to do so you need to have strong electrical field which is not strong magnetic field. These two fields have different source and nature.

Further, magnets have influence on some materials, but on gasoline???? NO !!!
Magnetic field can magnetize iron, nickel, cobalt and these materials will retain magnetic, on some materials like aluminum or platinum it disappears, on some does not have influence at all.

Honda or some other car producer would definitely patent this solution because up to 20% more millage ... Honda decide to work on swirl effect by opening one intake valve more, and other less. Gas station would magnetize fuel before selling it etc etc...

Combustion can be improved by better fuel to air ratio, making nozzles better, positioning them into center of cilinder, importing air to cilinder in specific way, changing atmosphere (N20 ..... but ionizing molecule of gasoline, bbuuaaahahahahahahahahaha.

To have this device, or to buy it I would just say: HAHAHAHAHAHAHAHAHAHAAHAHAHAHAHAHAHAHAHAhahaahahahahahahaa

 

[blinx9900]

Ionization, as to my knowledge is subtracting or adding electrons from the atoms that forms molecules. It can happen also when separating atoms and molecules. But to do so you need to have strong electrical field which is not strong magnetic field. These two fields have different source and nature.

Further, magnets have influence on some materials, but on gasoline???? NO !!!
Magnetic field can magnetize iron, nickel, cobalt and these materials will retain magnetic, on some materials like aluminum or platinum it disappears, on some does not have influence at all.

Honda or some other car producer would definitely patent this solution because up to 20% more millage ... Honda decide to work on swirl effect by opening one intake valve more, and other less. Gas station would magnetize fuel before selling it etc etc...

Combustion can be improved by better fuel to air ratio, making nozzles better, positioning them into center of cilinder, importing air to cilinder in specific way, changing atmosphere (N20 ..... but ionizing molecule of gasoline, bbuuaaahahahahahahahahaha.

To have this device, or to buy it I would just say: HAHAHAHAHAHAHAHAHAHAAHAHAHAHAHAHAHAHAHAhahaahahahahahahaa

hahaha i agree 100% it would be great if it worked but... this is one of the few parts i highly doubt.