My eg6 Rally car


Insane, I'm a real sucker for EGs and this one is off the rails! Love the sound, great job driving it and co pilot kudos! "keep it in, keep it in, keep it in!!!"
 
wow your car sounds nice, and nice driving dude. can't wait to see footage with the B16B fitted.

all the best.
 
Using one of these cams
incar onboard rally hd camera kit , rally cam promotion hd2 rally pack intercom lead

Took the car to get mapped last week but wasnt able to finish mapping due to a wiring fault. The engine would only rev to 7500rpm because of interference in the crank shaft sensor.

Fixed the fault and im booked in again for next week. Engine was making 186bhp and 137ftlb of torque at 7500rpm so there should be abit more left in her.
 
how much would a used set of the proflex set u back? cant seem to see a site that has proper cost lists. either proflex or avo. its more difficult too since im in barbados... nice car btw.
 
Still haven't the engine sorted. It wont rev past 7500rpm-7800rpm when its under load. it will rev to 9k if you free rev in neutral or in first gear, but in second, thrid, fourth and fifth it wont go past 7500. if i have throttle at 7500 it will rev past in all gear's and once its past that I can floor it till 9krpm no problem.

I have already changed the full engine wiring loom with a new one, new crank shaft sensor, coil pack, leads, plugs, coolant temp sensor, ecu, fuel pump, fuel pressure clock shows no drop in fueling, even took off the sump and checked to make sure the oil pick up was not blocked. I have it booked in again with the tuner for next week so really need to fix the f**kin thing soon.

The next rally is in 3 weeks The Rally of the Lakes and hopefully the car will be ready for this one.

2013 Killarney Rally Promo - YouTube
 
Last edited:
What ecu are you running again? Anything showing up in a datalog?
 
Running omex 600. I have the datalog software but have never used it. I assume that the tuner checked this when it was on the dyno and saw nothing out of the ordinary. What kind of information can be logged?
 
sdrp said:
Running omex 600. I have the datalog software but have never used it. I assume that the tuner checked this when it was on the dyno and saw nothing out of the ordinary. What kind of information can be logged?
Click to expand...

You can log all engine related sensors which is very useful when tracing running issues.
 
the car is finally running now. the problem was with the ecu and is fixed. The engine ended up making 194bhp and 137 ftlb torque on the dyno.
 
I wont be doing the Rally of the Lakes now cant get days off work for it. There are 3 more rallys before June so ill get out to one of them anyway.

I made up a little air box to hold the trumpets, I didnt feel safe having them open.

 
You must log in or register to reply here.
Back
Top