My Blue EK9 - Spoon, Apex'i, J's Racing, D2, Cusco & More...


Mexicubano407 said:
dude what exhaut is that?
Click to expand...

Its an Apex'i N1:nice:

My new Stoptech Slotted Front Disks arrived today:clap: I'll take actual pix of them at the weekend. They look very impressive. Thanks to Baz @ BSP-Imports for them:cool:

slotted20disc1lm9.jpg
 
Last edited:
you know what width they are the discs? also do you have contact details for the company that got them for you?!

I was looking at the stoptech 2-piece discs, but they ware 25mm thick that they do rather than oem 23mm although are listed that they will fit, hmmmmmmmmmmmmmmmm
 
come on anto post the picture of that password jdm cooling plate,did u sord out that problem with that rad.. stay
 
stevenEK9 said:
you know what width they are the discs? also do you have contact details for the company that got them for you?!


I was looking at the stoptech 2-piece discs, but they ware 25mm thick that they do rather than oem 23mm although are listed that they will fit, hmmmmmmmmmmmmmmmm
Click to expand...

They are 23mm afaik OEM sized replacments! Got them off EK9.org JDM EK9 Honda Civic Type R Forum - View Profile: baz_ctr on here:nice:

DA6mike said:
come on anto post the picture of that password jdm cooling plate,did u sord out that problem with that rad.. stay
Click to expand...

Dude I never got a PWJDM cooling plate or had a problem with a rad stay lol!

vtech6000 said:
Nice looking discs. What pads you using?
Click to expand...

Thanks man. Im running Endless SSY Pads, I think there brillaint:nice:
 
Last edited:
theres not enough pics of this car. . ;)
Hope all is well mate, and am looking forward to more of your build!
 
Thanks man. I promise I will get loads up soon along with some of the engine bay. Been so busy lately! Few more bits ordered;)
 
Okay well few little updates:

Got my Spoon Throttle Body fitted to the B18CR engine now. Got a new ITR T/B gasket for it as well, if anyone is interested the part number its in one of the pix below. Noticeable difference in low down power/torque:nice:

13012009074uu7.jpg


13012009075ev5.jpg


Also fitted my new Stoptech Slotted Front Disks! Just bedding them in at the moment but they seem good:)

13012009076bb6.jpg


13012009078ku6.jpg


Im waiting for prices back on new wheels...Hopefully i'll have them in the next few weeks. 15" FTW:clap: Also began to clean the engine bay today, and when Im finished i'll get some pix up. Its nothing special:)
 
Looking great as always Anto. Good luck with the engine bay, I've to get mine sorted soon too. Let us know about the wheels! Do you think it would be worth getting the ITB for the B16B?
 
seen this car down in honda heaven when it was gettin the transplant wat a car love it anto keep up the good work
 
bgm13 said:
Looking great as always Anto. Good luck with the engine bay, I've to get mine sorted soon too. Let us know about the wheels! Do you think it would be worth getting the ITB for the B16B?
Click to expand...

Will keep you informed sir;) Yeah the ITR throttle body would be a nice little upgrade for the B16B as the standard one is the same as EK4:(( I have a spare ITR T/B now, don't know weather to sell it or not:shocked:

Ek9 sham said:
seen this car down in honda heaven when it was gettin the transplant wat a car love it anto keep up the good work
Click to expand...

Aw thanks man, it was filthy that time. Hopefully will be shining the next time you see it:cool:

BACON said:
agreed:nice:
Click to expand...

Will try and get some more up soon, just a few little bits to sort out:nice:
 
Last edited:
Anto-EK9 said:
Will keep you informed sir;) Yeah the ITR throttle body would be a nice little upgrade for the B16B as the standard one is the same as EK4:(( I have a spare ITR T/B now, don't know weather to sell it or not:shocked:



Aw thanks man, it was filthy that time. Hopefully will be shining the next time you see it:cool:



Will try and get some more up soon, just a few little bits to sort out:nice:
Click to expand...

Ah sure you could always sell it to me...:p
 
finishing on the rotors look nice, btw did you get new calipers to match the new rotors or are you using the stock ones, how much bigger is this then stock and does the stock caliper fit with this if its a bigger size
 
itr hatch said:
finishing on the rotors look nice, btw did you get new calipers to match the new rotors or are you using the stock ones, how much bigger is this then stock and does the stock caliper fit with this if its a bigger size
Click to expand...

Strill running the standard calipers. And the rotors are the same size as stock rotors 282mm:)
 
were did u get the discs and pads from anto how do u find them good r bad investment??
 
Ek9 sham said:
were did u get the discs and pads from anto how do u find them good r bad investment??
Click to expand...

Got the pads from Couture Auto a few months ago. There excellent and the disks from BSP-Imports on here, just bedding them in at the moment but they seem good:nice:
 
Well just back from the rolling road. Happy with the results, and there are 2 video's to look at below. Here's the results, both are from the same rolling road. First when it was rolling roaded by the previous owner about 2 years ago (Elmo on here) when it had the B16B engine and a totally different spec list to when I had it:

B16B Engine

177.8 BHP
121 FT/LBS Torque

Now with my mods and B18CR Engine:

203.7 BHP
141.2FT/LBS Torque

Let me know what you think guys:)

YouTube - Honda Civic Type R (EK9) B18CR Rolling Road #1

YouTube - Honda Civic Type R (EK9) B18CR Rolling Road #2
 
You must log in or register to reply here.
Back
Top