Mattyssb's black caged ITB'd K24 EK9


Got all my fuel lines sorted today, taken me so long :angry2: haha



Also had a little play around with the front end (bumper, wings etc) to get it ready for paint




Using the enkei's as a test for Clearance and ride height as they are the same specs as the TE's, do need to raise it up and trim out some more of the bumper and wings

 
Last edited:
Had a little change of heart I sold the pair of te37's in favour of a set of 4 instead.

Funnily enough, I found them less than 30 minutes from my house. So I just couldn't say no.

16x8 et15 for the front
And
16x8 et30 for the rear





The concave on the +15 pair is just :drool:



Went and picked up my doors and boot from the body shop (left them there and forgot about them for awhile haha)
Started to put all the bodywork back on and make a start on aligning everything ready for it to go to paint soonish.
Also helped give me an idea of how much clearance I've got for the wheels

Set up the suspension by eye the best I could, set up the ride height to a decent height (still abit low for my liking) but once the car is running/moving I'll readjust then.









Sorted out my pedal box again, making sure it was set up correctly, just need some copper washers then I can bleed it all up.
Using a BYC floor plate to cover the bolt heads so I don't catch my foot on them.

 
This is just pure win.

You've made my mind up on changing my oem style carbon bonnet for a subtle vented one.
 
Looks very cool with the new wheels and the new wider wings.. this is shaping up nicely now

I will be interested to see how you get on with the pedal box, it will mean that you can move the seat back a good bit which is a good thing
 
SPek9 said:
Looks very cool with the new wheels and the new wider wings.. this is shaping up nicely now

I will be interested to see how you get on with the pedal box, it will mean that you can move the seat back a good bit which is a good thing
Click to expand...

Thanks man!
I'm interested to see how the pedal box works out too! The pedals are about 15-20mm further back and the seat is as far back as I could get it, about 5 inch away from step into the rear.
Hence why I had trouble with shifter, couldn't reach it when it was put in the oem location haha
 
Mattyssb said:
Thanks man!
I'm interested to see how the pedal box works out too! The pedals are about 15-20mm further back and the seat is as far back as I could get it, about 5 inch away from step into the rear.
Hence why I had trouble with shifter, couldn't reach it when it was put in the oem location haha
Click to expand...


That's ideal, as far back as possible! That's the good thing about the K-series shifter.. You can move it back as far as the cables stretch. I have seen boys making a mount for them and raising them up too

It should feel great on track!
 
You must log in or register to reply here.
Back
Top