Interior & Engine Shots


Dunsy

Dunsy

Active Member
Joined
Feb 21, 2008
Messages
2,593
Well im still ill with the mumps :( so thought id gather up the energy to take some photos of the inside...Im now shattered and away back to bed

1-2.jpg

12-1.jpg

6.jpg

10-4.jpg

7.jpg

8-2.jpg

9-4.jpg


5-3.jpg

4-3.jpg

3-2.jpg

11-4.jpg

2-3.jpg
 
Very nice mate i like it alot.

Can i ask

1st how much was the seat, side mounts and rails in total?

2nd why haven't you put your harness arround the cage? The belt angle is not suppose to be less than 20 odd degrees (according to Willans). Otherwise in an accident your belts rely on the seat to stop you travelling forward instead of using the belt structure to do the job.

Like this

DSCF0060.jpg
 
ijwhiteman said:
Very nice mate i like it alot.

Can i ask

1st how much was the seat, side mounts and rails in total?

2nd why haven't you put your harness arround the cage? The belt angle is not suppose to be less than 20 odd degrees (according to Willans). Otherwise in an accident your belts rely on the seat to stop you travelling forward instead of using the belt structure to do the job.
Click to expand...

Cheers everybody :)

Ian

1. Seat, side mount and rail was £435 delivered from Funky Power

I played FP and BuddyclubUK off against each other to get that price :nice:

2. I Have used the Harness anchor points in the back of the car, i was under the impression this was the correct way to do it?

I dont know whether the harness would reach if they were to be around the cage then upto the seat. the Harness has the clips for eyebolts?

Any advice is appreciated, dont wanna be putting myself in any danger if a crash was to happen.
 
Looking very nice man, think its one of my favourites on the forum. :nice:
 
Thanks for the comments lads :)

Got another Mod that should have arrived today but will get more pics up once once its fitted :)
 
Dunsy said:
Cheers everybody :)

Ian

1. Seat, side mount and rail was £435 delivered from Funky Power

I played FP and BuddyclubUK off against each other to get that price :nice:

2. I Have used the Harness anchor points in the back of the car, i was under the impression this was the correct way to do it?

I dont know whether the harness would reach if they were to be around the cage then upto the seat. the Harness has the clips for eyebolts?

Any advice is appreciated, dont wanna be putting myself in any danger if a crash was to happen.
Click to expand...

Thats a nice price.... :nice:

On the Harness front just undo (if you can) the clipper bit then tie the harness arround in the same sequence arround the cage. Are your buckles the same as mine?

If not a harness bar would be a nice idea.

NRG Harness Bar Civic vtec CRX Integra Type R EP3 DC5 on eBay, also, Honda, Car Parts, Cars, Parts Vehicles (end time 08-Jul-09 08:51:33 BST)
 
Would that mount ok with the cage?

Im not sure if they are the same as yours, i think the clips are sewn on if you know what i mean?

If your after a seat phone Faz and tell him that Dunsy sent you and Remind him of the price he gave me :) you may even get it cheaper!

Im going to have a look tomorrow at whether the harness is long enough to go around the bar and back down to the anchor points :)
 
nice car! congratulations! :bow:
 
Lovely car! Is the cage made by 'tongo' as in the stickers on the cage??? never heard of them before! Looks lovely though :nice:
 
You must log in or register to reply here.
Back
Top