Injectors?


murtle

Murtle the turtle
Joined
Jun 17, 2012
Messages
58
het im just wondering what would be a good upgrade for my b16a in terms of bigger injectors and fuel rail? or if theres any point at all? :lol: prob not but i said i'd ask! thanks :)
 
No point in bigger injectors unless your going turbo or the likes of above 240hp.

Rail and reg is fine even at that and above.

Ps B18CR and B16A use same size injectors
 
taught it'd be pointless alright! :/ im planning on running a s300 in the new year and i was told bigger throttle body and injectors but i suppose i'll just run it first then decide what to go at :) thanks for the reply Kieran :thanks:
 
Bigger injectors definitely not needed neither is bigger throttle body for stock engine.
 
X2 Bigger Body also pointless.

Save your money, spend it on a decent airbox setup, Ex Manifold and system. S300 will get everything working together properly.

Also spend some time giving the engine a good service, making sure all earths, distributor, leads and general electrics are all in good health. Surprising how much Earths and electrics sap performance if they are not up to scratch.

Then you'll be set for a Remap and Dyno.
 
bit of a hijack. Not so much bigger injectors but what about the idea of different injectors with a better spray pattern.
 
bit of a hijack. Not so much bigger injectors but what about the idea of different injectors with a better spray pattern.

Yes better atomization can lead to a small gain in power. Fuel pressure and nozzle type are the main attributes that effect the spray pattern of your injectors.
 
were going very technical for my small brain here now :D a different spray pattern?? :confused: so what type of nozzles would be of benefit? and i'll redo all the earths and that stuff 2 Kieran! :)
 
Back
Top