HondaNickx
Member
- Joined
- Jan 7, 2010
- Messages
- 166
Hi guys i'm Nick and i've got a 1998 honda civic EJ9(D14a4)
I've been working and researching for over 3years into what i should do with the engine and what engine i should get and what not.
In the end i said i would stick with the little 1.4 engine and give it a go.I love to do something different and this little engine has great engine dynamics.
I torn down a complete D14 engine just to get all the measurements of the connecting rods,pistons ,oil pump crank, ,...
This is my setup for now:
Engine:
- D14a4
- D16z6 intake manifold swap
- Obd1 conversion
- Custom made twinloop rear muffler
- custom made 2.5" exhaust
- 2.5" short ram
- Ebay 4-2-1 header
- P06 ecu tuned with Ectune by OMI performance
Exterior :
- Front bumper civic coupe
- Oem ek9 rear bumper
- Type-R style Grill
- Spoon style mirrors
- OEm EK9 rear spoiler
- SIR style Front Lip
- Type-R style rear lip
Interior:
- Acura integra Type-r Front seats
- JDM Integra Type-R rear seats
- Spoon Duracon Shift Knob
- Personal Neo grinta steering wheel
- SRR steering wheel spacer
- Mugen Pedals
- Civic Type-r shift boot
- Custom floor mats
Wheels & suspension
- Rims : Drag DR20 16*7" ,4x100 ,ET40
- Tires: Toyo T1R 205/45/16
- OMI Performance Spec SR Coilovers (10K Front,8K rear)
- EK9 front swaybar
I allready have these parts ready to be installed,items marked in red i still need to buy.All custom parts are made by myself .
- Bisimoto V2 custom 4-1 header
- Bisimoto springs & stock retainers
- Bisimoto Custom Level 2 cam
- Bisimoto cam gear
- Bisimoto custom head port job
- 10 :1 CR
- OMI performance flat face valves
- Custom 2.5" exhaust with 4" by 20" long resonantor from Hytech Exhaust.Custom pre muffler and a Custom twinloop rear muffler .
- Custom airbox with custom tapered intake tube- Custom TBIRA (Throttle body intake radius adaptor) and modified TB shaft.(Stock TB)
- Edelbrock intake manifold
- Acura RDX injectors with Xenocron adaptors
- Obd1 conversion & P06 ecu Tuned by OMI Performance With ECtune .
- Bisimoto flywheel
- Competition clutch Stage1
- D16z6 tranny :
* Mfactory 4.9 Final drive
* 3 & 4th D16a9
* Mfactory LSD
* Complete rebuild with Carbon coated synchro's.
These are some things i've been working on and done in the past
Electric hydraulic power steering conversion (EHPS)
Throttle body velocity stack (TBIRA)
Blox intake manifold porting
It flowed 256Cfm/260Cfm/260Cfm/260Cfm with a stock D-series Tb.
Diy twinloop
Airbox making
Coolant tank
Header building 4-1
And here some pictures of the new parts :
OMI SPEC SR coilovers
Bisimoto flywheel with friction serrations
Custom Bisimoto header
Acura Integra Type-r Seats
Bisimoto custom level 2 Regrinded cam (D14a4)
Some pictures of my civic
These are the most up to date pictures,wheels are going to be sold this year though.
I've been working and researching for over 3years into what i should do with the engine and what engine i should get and what not.
In the end i said i would stick with the little 1.4 engine and give it a go.I love to do something different and this little engine has great engine dynamics.
I torn down a complete D14 engine just to get all the measurements of the connecting rods,pistons ,oil pump crank, ,...
This is my setup for now:
Engine:
- D14a4
- D16z6 intake manifold swap
- Obd1 conversion
- Custom made twinloop rear muffler
- custom made 2.5" exhaust
- 2.5" short ram
- Ebay 4-2-1 header
- P06 ecu tuned with Ectune by OMI performance
Exterior :
- Front bumper civic coupe
- Oem ek9 rear bumper
- Type-R style Grill
- Spoon style mirrors
- OEm EK9 rear spoiler
- SIR style Front Lip
- Type-R style rear lip
Interior:
- Acura integra Type-r Front seats
- JDM Integra Type-R rear seats
- Spoon Duracon Shift Knob
- Personal Neo grinta steering wheel
- SRR steering wheel spacer
- Mugen Pedals
- Civic Type-r shift boot
- Custom floor mats
Wheels & suspension
- Rims : Drag DR20 16*7" ,4x100 ,ET40
- Tires: Toyo T1R 205/45/16
- OMI Performance Spec SR Coilovers (10K Front,8K rear)
- EK9 front swaybar
I allready have these parts ready to be installed,items marked in red i still need to buy.All custom parts are made by myself .
- Bisimoto V2 custom 4-1 header
- Bisimoto springs & stock retainers
- Bisimoto Custom Level 2 cam
- Bisimoto cam gear
- Bisimoto custom head port job
- 10 :1 CR
- OMI performance flat face valves
- Custom 2.5" exhaust with 4" by 20" long resonantor from Hytech Exhaust.Custom pre muffler and a Custom twinloop rear muffler .
- Custom airbox with custom tapered intake tube- Custom TBIRA (Throttle body intake radius adaptor) and modified TB shaft.(Stock TB)
- Edelbrock intake manifold
- Acura RDX injectors with Xenocron adaptors
- Obd1 conversion & P06 ecu Tuned by OMI Performance With ECtune .
- Bisimoto flywheel
- Competition clutch Stage1
- D16z6 tranny :
* Mfactory 4.9 Final drive
* 3 & 4th D16a9
* Mfactory LSD
* Complete rebuild with Carbon coated synchro's.
These are some things i've been working on and done in the past
Electric hydraulic power steering conversion (EHPS)
Throttle body velocity stack (TBIRA)
Blox intake manifold porting
It flowed 256Cfm/260Cfm/260Cfm/260Cfm with a stock D-series Tb.
Diy twinloop
Airbox making
Coolant tank
Header building 4-1
And here some pictures of the new parts :
OMI SPEC SR coilovers
Bisimoto flywheel with friction serrations
Custom Bisimoto header
Acura Integra Type-r Seats
Bisimoto custom level 2 Regrinded cam (D14a4)
Some pictures of my civic
These are the most up to date pictures,wheels are going to be sold this year though.
Last edited: