Chaddy
ABS I removed these are the fittings and lines I used:
Civic Si proportion valve:
On its way out!
Almost there, as you can see with the motor in the bay space is tight behind there:
Gone!
My idea for the brake lines without tube bending-flaring, etc. again it's simple and it works!
Brake line parts purchased from Summitracing.com are:
-AER-FBM2941 STEEL BRAKELINE ADAPTER x4
-EAR-63010122ERL -3 ST./ST. 22" HOSE x1 < Going to change to 90DEG. off the M/c
-EAR-63010132ERL -3 ST./ST. 32" HOSE x1
-EAR-63010140ERL -3 ST./ST. 40" HOSE x1
-EAR-63011732ERL -3 ST./90 DEG. 32" HOSE x1
This is the direct link where I bought the Jackson Racing pulley installed. P/N: 052-154
Supercharger.com High Performance Parts & Accessories <-P/s pulley you need is #4