EK9 -> K20 swap


Front suspension 99.999% complete just waiting on the DC2 shock fork bolt/nut from Honda I'm bored I just wanted to see the wheels on :confused:

img1337k.jpg


img1338dt.jpg


Skunk2 Mega Power header sits very nice *Check*

img1345k.jpg


This is what I came up with for a vacuum source for my brake booster stock location was VERY close to the hood, curious to see how it works:D

img1343yn.jpg


aaaannnndddd here's a closer look

img1342sp.jpg


For my intake this is what I came up with, I just used tape to mock it up, have to get it welded tomorrow

img1339hza.jpg


img1341h.jpg


Thanks for watching!
 
there will be some bang off that exhaust dude build looks well fair play to you
 
dc5con said:
there will be some bang off that exhaust dude build looks well fair play to you
Click to expand...

Trust me I know coming from the JUN EK with a full 2.5" JUN exhaust no mid muffler.....I know but like we say down here in Grenada this car is a "weekend ting"
 
how i missed this i have no idea, Looks great, respect for doing it yourself and further more, Doing it Properly. Sorry to dwell on the fact but i think with your illness more respect is due, and its a good show of what can be done if you don't let things get the better of you in life.

Best of luck with the rest of it. Although i missed alot so far, i have read all of the thread in the past hour or so and enjoyed it so i will keep a keen eye on this now.

peace dude. :nice:
 
Topher-EK9 said:
how i missed this i have no idea, Looks great, respect for doing it yourself and further more, Doing it Properly. Sorry to dwell on the fact but i think with your illness more respect is due, and its a good show of what can be done if you don't let things get the better of you in life.

Best of luck with the rest of it. Although i missed alot so far, i have read all of the thread in the past hour or so and enjoyed it so i will keep a keen eye on this now.

peace dude. :nice:
Click to expand...

Thanks for the kind words Topher!
 
Well I just got the DC2 shock fork bolts/nuts:

img1346i.jpg


Why run all the steel braided lines from the SI proportioning valve and leave the old oem rubber brake hoses???

img1347l.jpg


Take Care!
 
So! Here I am again with a little hitch in the plan, my brother didn't handle the jack properly dropped the crap out the car on it and put a nice little dent in the frame.

No one got hurt that's the most important thing and things like this can always be repaired so I guess she's going to the body shop sooner! In Grenada we see things like this and just say "Small Ting":rolleyes:

img1350lr.jpg


img1352r.jpg


And here we go she's on the floor looking pretty!

img1348h.jpg


img1349fc.jpg


After the body shop I'll finish up with the bay cleaning, etc.

Take Care!
 
Last edited:
Just finishing up the Koni/GC install + Brake line swap, I did the front already so just the rear to finish up.

img1353kq.jpg


img1354pf.jpg


Don't ask I had to get creative to line everything back up! Its ok Reamos its ok trust me!:rolleyes: Gonna upgrade these brakes later mosdef.

img1356k.jpg


How cute, EK9 exhaust system not too bad Soichiro Honda:D

img1355cy.jpg


Out with the old in with the new well the new is already in there.

img1359uy.jpg


System is bled good to go SO next up body shop this is exactly why I wanted to do all the heavy work before repaint like what happened with the frame in front. After repaint I will adjust ride height and finish with the engine bay clean up.

Take Care Everyone!
 
Last edited:
robbyp said:
Like you said, as long as no one was hurt itl be all good
Click to expand...

Yup I had a friend lose his right index finger to a Galant VR4's crank pulley, safety first I say. If crap happens as long as everyone is all good that's the most important part.
 
Road trip for her to the body shop! I kinda miss her already:(

img1360d.jpg


img1362aj.jpg


Complete repaint!

Take Care!
 
You must log in or register to reply here.
Back
Top