Kurtknight
Member
- Joined
- May 8, 2012
- Messages
- 192
So! This is what it means to "bite the bullet"
Civic Si proportion valve:
On its way out!
Almost there, as you can see with the motor in the bay space is tight behind there:
Gone!
Ok so! I'v got options for this little bastard!
1. Soak it in C16 and set it on fire!
2. Use my 45mm and give it more holes!
3. Tie it to the back of my truck and drag it through the mud!
4. All 3 at once!
I am joking of course!
Which header should I use?
Thanks haitch for taking the time to explain the header issues you've been through with your swap.
Civic Si proportion valve:
On its way out!
Almost there, as you can see with the motor in the bay space is tight behind there:
Gone!
Ok so! I'v got options for this little bastard!
1. Soak it in C16 and set it on fire!
2. Use my 45mm and give it more holes!
3. Tie it to the back of my truck and drag it through the mud!
4. All 3 at once!
I am joking of course!
Which header should I use?
Thanks haitch for taking the time to explain the header issues you've been through with your swap.
Last edited: