JohnOBrien8
Member
- Joined
- Feb 27, 2012
- Messages
- 568
Is the diff in an s80 lsd box the exact same as an ek9 s4c lsd diff?
If it was fitted in an s80 lsd and its a 4.78fd what else could it be?Has to be the final drive then.. if your box has the standard EK9 LSD and ring gear but the 4.78 you have has a smaller ID then it can't be an oem 98 DC2 Final drive?
The 4.7 ring gear is measuring 110mm inside diameter, what is this 4.7 for? If i machined the inside diameter to 117mm would it work?I have mfactory 4.9 fd in front of me for a type R box, I'm going to measure the inside diameter
EDIT - I measured 117mm inside diameter, if your 4.7 is smaller I'd say it's for a non-type R box
The 4.7 ring gear is measuring 110mm inside diameter, what is this 4.7 for? If i machined the inside diameter to 117mm would it work?