Ctr cans degree card

[turn it up]

Anyone no or able to find the degree card for ctr cams.
Going to be dailing in a set so need degrees for centrelines of the cams.

Thanks eugene

 

[punkyy8]

I'll be looking for this too so be hand to make it a sticky

 

[burkey0013]

I'd also be interested ..

 

[Rich777]

Degree them in on a dyno. Other than that you're waisting your time.

 

[turn it up]

Degree them in on a dyno. Other than that you're waisting your time.

Last time i degreed them in we gained no extra power on the dyno.
I like to degree them in. then adjust on dyno one way or other fast to see if there is gains to be had cuts down on dyno time and money

 

[turn it up]

found this on honda-tech

98* ATDC for the intake cam and 110* BTDC for the exhaust cam.

This is the same for All OEM Honda DOHC Vtec cams.

 

[rs250nut]

You can work out the centrelines yourself with a dti and a degree wheel..........

 

[turn it up]

You can work out the centrelines yourself with a dti and a degree wheel..........

I want to dial in the cams and set them back to oem spec after the head was milled. Not what the centre lines of the cams are now in the engine if you get .

Found my now info thanks