Come on tegiwa!


Jrdn92 said:
Is there a link to fit these so i can try my one?
Click to expand...


If your looking for instructions its dead simple. They're may be a few brackets and plugs that you will have to unhook to fit the bracket to the strut tower, thats it. Undo them and then bolt your brace to the car and then adjust your stopper so its touching the MS.
 
e5k1m0 Sam said:
True that now he has it, it would be best to get it to fit rather than have to go and buy another one, but also I wish more people would complain when things aren't as they should be. People get away with a lot cause nobody likes to make a fuss. This part is clearly not fit for purpose so to be fair he has a right to moan and let everyone else know
Click to expand...

vti2010 said:
Really getting beyond a joke now.
Click to expand...

jesse888 said:
Like I said at the start. I'm not into the tegiwa bashing thing. An email to them wouldn't have done anything. Now that this thread has blown up they are looking into it. So by "crying" about it I may have socked this issue for future buyers. THAT was the reason I started this thread.
Click to expand...


^^ spot on

without making a fuss people wouldnt have a clue about these **** designd parts so thatd allow tegiwa to keep on selling them and the public buying them. They obviouslly dont try the parts on the correct cars before selling them to the public so people need to make a fuss

had a look at my mates civic yesterday who i hadnt seen in about 6months, his rocker cover washers were rusted to ****, i asked whats happend there.... his reply was "tegiwa"

pfft!

:angry:
 
elchunk said:
If your looking for instructions its dead simple. They're may be a few brackets and plugs that you will have to unhook to fit the bracket to the strut tower, thats it. Undo them and then bolt your brace to the car and then adjust your stopper so its touching the MS.
Click to expand...

Cheers i'll give it a go during the week
 
civicx3 said:
^^ spot on

without making a fuss people wouldnt have a clue about these **** designd parts so thatd allow tegiwa to keep on selling them and the public buying them. They obviouslly dont try the parts on the correct cars before selling them to the public so people need to make a fuss

had a look at my mates civic yesterday who i hadnt seen in about 6months, his rocker cover washers were rusted to ****, i asked whats happend there.... his reply was "tegiwa"

pfft!

:angry:
Click to expand...

Seriously? Stainless steel rusts? Anodised aluminium rusts?

Does he realise faulty products can and would be replaced?
 
bandwagon.png
 
Just noticed this thread after I contacted tegiwa about mine, they said they will have the problem sorted in a few weeks, here is some pics of mine fitted
 

Attachments

  • $image.jpg
    $image.jpg
    344.6 KB · Views: 394
Tegiwa Imports said:
We were waiting on the Skunk2 shipment to arrive, but our freight company messed up big time, somehow the pallet ended up in Jeddah!!! Crazy I know but should be with us Monday/Tuesday. The RRC could have been delivered even sooner but we presumed the header was going to arrive at the end of last week.

All I can say is sorry, but for a pallet to end up in Jeddah is totally out of our control - our aim is for customers to have their parts within 24/48 hours from ordering.
Click to expand...

Most parts have arrived now : )
 
Tbh why should people not bitch to others when they have a problem like this. I dont know about you but i would rather here now then if i had brought it and this happened. My decat situation cause me a right ballache with my car being beeched for 2 days. Maybe this way they will finally sort the quality out with no extra cost to feature goods.
 
tidyneil said:
Just noticed this thread after I contacted tegiwa about mine, they said they will have the problem sorted in a few weeks, here is some pics of mine fitted
Click to expand...

whats wrong with yours? not enough room like the other one posted?
 
Some of the simplest things in my engine bay all took forever to create for one reason or another...this seems to be a bit with the same issues, just not well developed prior to making a ton of them, now they need to sell it all off damaging their name a bit. Shame.
 
tama666 said:
Some of the simplest things in my engine bay all took forever to create for one reason or another...this seems to be a bit with the same issues, just not well developed prior to making a ton of them, now they need to sell it all off damaging their name a bit. Shame.
Click to expand...

^^* so true tam
 
vti2010 said:
^^* so true tam
Click to expand...

Not really, if this batch turns out to be wrong then they will just be scrapped. A new batch will be made and that'll be the end of it. We have sold 500+ of these, and only order in batches of 50.
 
Tegiwa Imports said:
Not really, if this batch turns out to be wrong then they will just be scrapped. A new batch will be made and that'll be the end of it. We have sold 500+ of these, and only order in batches of 50.
Click to expand...

So tegiwa customers are the QA process? :shocked:
shouldn't tegiwa know if a batch is good or not? :shocked:
one would think that the design would be final after 500 of these bolt on brackets are sold...I guess honda keeps changing where they place all the holes in the engine bay...dam honda!
 
Last edited:
tama666 said:
one would think that the design would be final after 500 of these bolt on brackets are sold..
Click to expand...

Yeah thats what we thought. Anyway, the EK is coming down at the end of the week and we'll finally get to the bottom of this.
 
You must log in or register to reply here.
Back
Top