Good-evening
ive decided to break my car and put the money towards a new project, the new project is a honda of the same generation Wink
All prices quoted are minus paypal fees and postage, but im open to a bit of negotiation Wink
All parts are located near darlington Co. Durham
my number is 07826 938896 pictures will be available shortly im going to start stripping it tomorrow night
Benson / laskey b18 block is sold
B16b head - just resurfaced, just fitted with new ferrea valves, new ferrea stem seals, valves proffessionally ground in, head professionally de-coked, done 0 miles since this worked just assembled and car has ticked over aournd 45mins includes cams dizzy cam cover, everything apart from inlet exhaust £600
B16b gearbox - fully rebuilt, i have a receipt for 2k. the following work carried out close ratio mfactroy 3/4/5 gears and Quaiffe ATB diff. done 0 miles brand new, just assembled and ticked over £650
drive shafts £120 for all 3 good cond
5 stud setup, 282 disks and calipers front 260mm disks and calipers rear. no problems with it bearings fine etc. £450
Enkei NT-03 wheels with Hankook RS2 tyres with 4-5 tread all round, very good cond. a couple of minor stone chips 5x114.3 £580
Hondata s300, boost control software, datalogging etc. fully socketed in a p28 and ready to be plugged in, i can include ob2b - 0bd1 harness at no extra cost £ 500
Accord type r seats on ek9 rails fully retrimmed, slight rip. pics are needed for this i think £370
TDM X brace - good conditions, fits really well £ 120
KW 2 way adjustable race coilovers - the real deal 16kg front spring 22kg rear, the same setup as was on touring cars etc. pillowball top and bottom mounts £700 spare springs and all parts included
Function 7 LCAs these are designed to fit ITR eyelet suspension onto Ek civics - really nice piece £180
Blox rear camber kit good cond. £30
Mfactory spherical bearing toe adjusters £60
Blox spherical bearing drop links £20
All ek9 bodypanels available, including facelift front end offers on this, the bumper is designed to fit the intercooler so has been chopped a bit, it isnt visible but structural rigidity is reduced a bit £offers
Ek9 dials £100
T1 race Koyo rad setup - never suffer from overheating again!!
T1 Race Development - Your source for all your racing needs!
£450
Ek9 carpet £40
offers on EK9 dash door cards etc.
B&R breather setup, minus the block plugs, aeroquip fittings included £100
Moroso sump and pickup, never suffer from oil starvation its the 5.5 quart with the gated pickup £150
Defi dein gauges all parts presents sensors wires etc and in good working condition. £240
SLS shorty t3 Turbo manifold, screamer pipe, tial 38mm and 3inch exhaust custom made in stainless turbo back, i think this is best sold as a package as it all fits together really well, and the wastegate is welded to the manifold and screamer because of the welded wastegate i will let it go cheap £750 for the lot, thats the major part of a turbo kit and good quality parts
all you need is a t3 housed turbo and this will all bolt up a treat
Straight Line Specialties
Intercooler setup, ebay cooler quite big, ive been advised its genuinely good till 400bhp, custom made stainless boost pipes to fit EK chassis and rubber connectors included
£180
Aem uego wires are chopped a bit to accomodate into loom, but everything included
£90
OEM ek9 suspension, has covered 100k kilometers good cond.
£90 all four dampers
Competition clutch - stage 4 clutch, its done around 800 miles on a basempa so no hard starts etc, £100
all facelift rear end available £offers
OMP steering wheel 330mm, steering boss for civic and adjustable spacer
£150
Rear anti roll bar and mounts, no droplinks £40
Front ARB droplinks( if i can get them off without breaking them) inclued and mounts £50
Inlet manifold & tb £100
Injector dynamics 1000cc injectors - the latest in injector technology!
Injector Dynamics 1000cc Bosch injector
includes all parts to connect
£180
Walbro 255 pump £ 40
Loads of other parts, PM me if u are looking for anything or call me 07826 938896 - i'll get pics of all parts up ASAP
Cheers Dave
ive decided to break my car and put the money towards a new project, the new project is a honda of the same generation Wink
All prices quoted are minus paypal fees and postage, but im open to a bit of negotiation Wink
All parts are located near darlington Co. Durham
my number is 07826 938896 pictures will be available shortly im going to start stripping it tomorrow night
Benson / laskey b18 block is sold
B16b head - just resurfaced, just fitted with new ferrea valves, new ferrea stem seals, valves proffessionally ground in, head professionally de-coked, done 0 miles since this worked just assembled and car has ticked over aournd 45mins includes cams dizzy cam cover, everything apart from inlet exhaust £600
B16b gearbox - fully rebuilt, i have a receipt for 2k. the following work carried out close ratio mfactroy 3/4/5 gears and Quaiffe ATB diff. done 0 miles brand new, just assembled and ticked over £650
drive shafts £120 for all 3 good cond
5 stud setup, 282 disks and calipers front 260mm disks and calipers rear. no problems with it bearings fine etc. £450
Enkei NT-03 wheels with Hankook RS2 tyres with 4-5 tread all round, very good cond. a couple of minor stone chips 5x114.3 £580
Hondata s300, boost control software, datalogging etc. fully socketed in a p28 and ready to be plugged in, i can include ob2b - 0bd1 harness at no extra cost £ 500
Accord type r seats on ek9 rails fully retrimmed, slight rip. pics are needed for this i think £370
TDM X brace - good conditions, fits really well £ 120
KW 2 way adjustable race coilovers - the real deal 16kg front spring 22kg rear, the same setup as was on touring cars etc. pillowball top and bottom mounts £700 spare springs and all parts included
Function 7 LCAs these are designed to fit ITR eyelet suspension onto Ek civics - really nice piece £180
Blox rear camber kit good cond. £30
Mfactory spherical bearing toe adjusters £60
Blox spherical bearing drop links £20
All ek9 bodypanels available, including facelift front end offers on this, the bumper is designed to fit the intercooler so has been chopped a bit, it isnt visible but structural rigidity is reduced a bit £offers
Ek9 dials £100
T1 race Koyo rad setup - never suffer from overheating again!!
T1 Race Development - Your source for all your racing needs!
£450
Ek9 carpet £40
offers on EK9 dash door cards etc.
B&R breather setup, minus the block plugs, aeroquip fittings included £100
Moroso sump and pickup, never suffer from oil starvation its the 5.5 quart with the gated pickup £150
Defi dein gauges all parts presents sensors wires etc and in good working condition. £240
SLS shorty t3 Turbo manifold, screamer pipe, tial 38mm and 3inch exhaust custom made in stainless turbo back, i think this is best sold as a package as it all fits together really well, and the wastegate is welded to the manifold and screamer because of the welded wastegate i will let it go cheap £750 for the lot, thats the major part of a turbo kit and good quality parts
all you need is a t3 housed turbo and this will all bolt up a treat
Straight Line Specialties
Intercooler setup, ebay cooler quite big, ive been advised its genuinely good till 400bhp, custom made stainless boost pipes to fit EK chassis and rubber connectors included
£180
Aem uego wires are chopped a bit to accomodate into loom, but everything included
£90
OEM ek9 suspension, has covered 100k kilometers good cond.
£90 all four dampers
Competition clutch - stage 4 clutch, its done around 800 miles on a basempa so no hard starts etc, £100
all facelift rear end available £offers
OMP steering wheel 330mm, steering boss for civic and adjustable spacer
£150
Rear anti roll bar and mounts, no droplinks £40
Front ARB droplinks( if i can get them off without breaking them) inclued and mounts £50
Inlet manifold & tb £100
Injector dynamics 1000cc injectors - the latest in injector technology!
Injector Dynamics 1000cc Bosch injector
includes all parts to connect
£180
Walbro 255 pump £ 40
Loads of other parts, PM me if u are looking for anything or call me 07826 938896 - i'll get pics of all parts up ASAP
Cheers Dave