I BORROWED THIS INFO FROM HONDA-TECH:
#1 I vacuumed the whole surface of the seats.
#2 I mixed together the soap I would need to clean the seats. I created the diluted woolite solution that is recommended by the creators of the fabric. For this, you can see I used a standard spray bottle and filled it 6 - 2/3 cups water & 1 - 2/3 cup woolite fit just about perfect.
#3 (not necessary) I did this only because I had this little steam cleaner laying around, however it didn't do anything, so disregard this step.
#4 I then wetted down the whole surface of the seats.
& be sure to change your water often otherwise it'll take longer.
#5 I then whipped out the diluted woolite solution I had created earlier and sprayed it on the seats sections at a time.
You can see the difference and you'll know that the soap is doing it's job.
#6 Be sure to lather the soap in nice and good. To do this, just gently rub the soap after you spray it on and you will see it get foamy. I found that doing this with your hand works best.
#7 I then wiped as much soap off the seat as I could with wet towels, again remembering to empty the water as it gets dirty.
#8 This step didn't need to come here, it could've came last, however since the seats needed to just sit around and dry for a few hours I figured I'd put the seat rails on (well actually, my back hurt, so I let me friend put the seat rails on while I sat back and relaxed. )
#9 To get the seats to dry quicker, you can vacuum them again, however I have a carpet cleaner, so I just used one of the attachments to help suck the water out.
#10 (if applicaple) To speed up the drying process, I placed a little space heater in front of the seats to help them along. There's nothing wrong with air drying, I just had little patience and a space heater available.
#11 In the meantime, we went out in the garage and made a few car noises.
#12 When they were finally dry, I threw them in and sat back like this:
The End.