b18c4 botom end knoking

[ionut_50]

hi,after my rebuild whit b16b piston and acl rod and main bearing,botom end knoking only when i start the engine,one second bifor i start(clanc clanc),like i have no oil.after is fain, 8k rpm 9k rrpm no knoking
watch the video. 1min 11 se and 1min 19 sec
http://www.youtube.com/watch?v=Le3C_yO9NSA

sound like crank or bearing..please help me

 

[Rich777]

Hi, are you from England or do you speak full english ? If so please do so.

I would say its bearing related but if your not getting any knock at 8000rpm it can't be. Anyway i'd run a compression test if possible and drain the oil to check for any metal.

 

[ionut_50]

hi,after my rebuild whit b16b piston and acl rod and main bearing,botom end knoking only when i start the engine,one second bifor i start(clanc clanc),like i have no oil.after is fain, 8k rpm 9k rrpm no knoking
watch the video. 1min 11 se and 1min 19 sec
‪18072011.mp4‬‏ - YouTube

sound like crank or bearing..please help me

Hi, are you from England or do you speak full english ? If so please do so.

I would say its bearing related but if your not getting any knock at 8000rpm it can't be. Anyway i'd run a compression test if possible and drain the oil to check for any metal.

i`m from romania, i have just 200 km whith this setup,is knoking from first start,i have a socketet ecu and i wait the chips for high compresion,after i do the compresion test

 

[Rich777]

Ok no problem my friend, your English is good . I havent got good signal on my so i can't view that video. As soon as i have i'll give you my opinion

 

[Rich777]

Engine sounds fine to me ??? Anyone else here anything i can't as i'm using my phone.

 

[vti2010]

Engine sounds fine to me ??? Anyone else here anything i can't as i'm using my phone.

Nope I fort I kept missing it but after keep rewinding I still cant here any knocking

 

[vti2010]

Maybe spamMing in a sly way....

 

[Rich777]

Nah i doubt this guy is.

 

[ionut_50]

‪b18c4 vtec high compresion test 1‬‏ - YouTube

look no problem,end i stop motor,when i`m starting again the motor knoking 2-3 sec.

 

[CR1S]

i can just hear you hitting the rev limiter tbh

 

[wishy]

Cant hearing anything bar the birds haha, Try getting a video under the hood bud mite be clearer to hear ?

 

[thorburnlad]

loose pulley?

 

[ionut_50]

loose pulley?

???

 

[Sid-ek9]

Sounds perfectly normal to me lol

 

[ionut_50]

Sounds perfectly normal to me lol

but is not (