What's my 4.4 fd worth?

[rallypvc]

Got my 4.4 fd out my s4c ek9 box very good order low mileage no chips cracks or any damage what so ever what's it worth? Genuinely not got a clue

 

[Kipper]

Might be worth £40-50.00 to someone, Little bit of an upgrade for the B16A2 S4C which run's a 4.2 fd as far as I know.

 

[Puggie]

will this fit over an OEM (DC2) LSD?

 

[rallypvc]

will this fit over an OEM (DC2) LSD?

Don't know mate but I'm sure someone will

 

[Kipper]

Yes, if the S4C is definitely from a B16B, the DC2/EK9 share the same helical LSD as far as I'm aware.

 

[ali-c]

Might be worth £40-50.00 to someone, Little bit of an upgrade for the B16A2 S4C which run's a 4.2 fd as far as I know.

About £250-350 depending on condition I should think if it is a LSD from and ek9.

The ek4 also runs an identical SC4 gearbox with a 4.4 final drive. Just without the helical LSD. You cannot swap the lsd directly into the ek4 housing though.

The dc2 runs a s80 which will fit the other two, but comes in 4.4fd from 96-98 and then the 4.7fd from 98-00. Both of course runs the same helical lsd.

Hope this helps.

 

[rallypvc]

About £250-350 depending on condition I should think if it is a LSD from and ek9.

The ek4 also runs an identical SC4 gearbox with a 4.4 final drive. Just without the helical LSD. You cannot swap the lsd directly into the ek4 housing though.

The dc2 runs a s80 which will fit the other two, but comes in 4.4fd from 96-98 and then the 4.7fd from 98-00. Both of course runs the same helical lsd.

Hope this helps.

It's not the diff I have just the fd

 

[eg6 flex]

Don't think you'll get very much for just the final drive dude

 

[oifovo]

FD alone not worth much, £50 tops I'd say, if you can find someone who wants it. I px'd mine against Mfactory 4.9 and paid £150 on top.

 

[Kipper]

The ek4 also runs an identical SC4 gearbox with a 4.4 final drive.

I'm pretty sure they had a 4.27 as standard for the European models and a 4.4 for the JDM S4C.

 

[rallypvc]

Had a few pm's about this not selling but I am looking for an ek9 front arb with the mounting brackets don't need the drop links I can buy yours you buy mine

 

[elchunk]

i've given one away and have another out of my EK9 that i cant see me selling any time soon.

 

[jesse888]

Had a few pm's about this not selling but I am looking for an ek9 front arb with the mounting brackets don't need the drop links I can buy yours you buy mine

I've got ek9 front arb. No brackets for it though just the bar

 

[Squire]

I'm pretty sure they had a 4.27 as standard for the European models and a 4.4 for the JDM S4C.

EK4 vti is definitely 4.4fd standard...the mb6 has a 4.2