What brake MC do you use on 98 integra front and rear brakes for the EJ?


R

rick nguyen

New Member
Joined
Sep 8, 2008
Messages
6
Okay, I have a complete front and rear 1998 integra brake setup. I got the 7/8 brake master cylinder(99 civic si) all hooked up. But doing some reading on the net, the front calipers on the integra are bigger than the si. So in the discussion, they say to use the 15/16 brake master cylinder from the integra ls (non abs), which makes sense.
So now does the 15/16 brake master cylinder fit the civic dx brake booster? Also I got the integra brake lines that are looking way too long. I should go with the 99 civic si lines?
 
Last edited:
I used 99 civic SI lines, my exact setup is:

-94 integra front rotors with 93 civic EX calipers
-94integra rear rotors and brakes

also i am still using my oem 13/16 MC with no problems and my OEM EJ (same as em1) prop valve.
 
You can keep ur 7/8 MC. but it is always better to get larger MC as you wan more stopping power. I recon the 1" MC is the best
 
Use a 15/16 MC it will bolt up to your booster but to get the best improvement you should swap a brake booster from a ITR also
 
i tryed fitting a vti mc to my ej9 servo and it didnt push any fluid through :S i put my original ej9 one back on and it bled through fine and now my servo leaks air :((
 
yup yup, on my ej9 mc it seems the rod is inside the mc and the rod on the vti one sticks out more so it should work in theory? im confuse with my brakes now there is jsut so many bits i need im lost lol
 
Probably needed to adjust your brake pedal to suit the MC. is there a possibility that the MC you got from the vti might be damaged inside
 
You must log in or register to reply here.
Back
Top