rr1396
EJ8 Newbie
- Joined
- Oct 16, 2007
- Messages
- 9
Hi, i have a 99 civic Ex chasis. For starters, i am not very knowledable in suspenssion set-ups, i am trying to learn as i go by reading different articles and peoples opinions.
i was reading the thread titled "Information About EK Sway Bars *USEFULL INFORMATION*" and have a few questions.
I have a ground control sleeve kit w/eiback street springs and kyb agx shocks. Megan front and rear kit kit and rear lower control arms.
I'm looking into upgrading my suspension and some of the parts i had in mind were: sport springs, rear strut tower, front and rear anti-roll bars, roll center adjusters.
I have questions concerning the anti-roll bars.
My front LCA's are the EX/HX style so from my udnerstanding of the article, i can install a front integra type r anti-roll bar as is, in other words, with my current EX/HX style front LCA's and end links. Is this correct?
As for my rear LCA's, they are aftermarket (megan). I am planning on purchasing oem integra type r end links and anti roll bar. Will oem endlinks from an integra type R work with these LCA's?
As for the subframe brace, i was thinking of going with the ASR. Now, i have read that rear spring rates are a factor when choosing a rear anti-roll bar. I thought the subframe brace would do the job, but apperantly not. Would you recomend using my current street springs with the 22mm anti-toll bar of an integra type R?
Thanks in advance.
i was reading the thread titled "Information About EK Sway Bars *USEFULL INFORMATION*" and have a few questions.
I have a ground control sleeve kit w/eiback street springs and kyb agx shocks. Megan front and rear kit kit and rear lower control arms.
I'm looking into upgrading my suspension and some of the parts i had in mind were: sport springs, rear strut tower, front and rear anti-roll bars, roll center adjusters.
I have questions concerning the anti-roll bars.
My front LCA's are the EX/HX style so from my udnerstanding of the article, i can install a front integra type r anti-roll bar as is, in other words, with my current EX/HX style front LCA's and end links. Is this correct?
As for my rear LCA's, they are aftermarket (megan). I am planning on purchasing oem integra type r end links and anti roll bar. Will oem endlinks from an integra type R work with these LCA's?
As for the subframe brace, i was thinking of going with the ASR. Now, i have read that rear spring rates are a factor when choosing a rear anti-roll bar. I thought the subframe brace would do the job, but apperantly not. Would you recomend using my current street springs with the 22mm anti-toll bar of an integra type R?
Thanks in advance.