spoon monoblock on EK4

[luisquisito]

Hey guys, I just bought myself a pair of Spoon Monoblock callipers for EK9.
But I live in Brazil and we don't have EK9's, but that's not a problem, I'm building my Ek9 wannabe from an EK4 ... LOL !!!!

My questions are :

In order to use any 300mm rotor, I'll have to redrill a 5lug from another car.
Which rotor can I fit in the EK4 hub? The same ones that fit EK9's ??
What's the offsef of EK4 and EK9 disks?

I have readed in the internet to use an accord CL7 disk, which is 300mm x 26mm ... But what offset?
Where can I find a catalog with this kind of information ?

Thanks in advance

Luis

 

[No_Fear]

http://project-mu.co.jp/matching/rotor/SCR_matching.htm
go to honda tab to get the part # you want and then to disc size tab to check the size.

 

[luisquisito]

Thanks a lot !!!!!!

 

[luisquisito]

Just to let you guys know, to fit the monoblock on my EK I'm using 06+ Si disc rotors that are 300mm x 25mm re-drilled to 4x100.
But the offset of the calliper do not match the disc, so what I did was machine the bracket and take off 2,5mm of the flange, bringing the calliper closer do the car, and away from the wheel.
That solve me two problems : One was the calliper/rotor offset and the other was the wheel clearance. Now I have a lot more wheels to choose without the need to use spacers.

 

[No_Fear]

post pics if you can when you finish the project.