Al-himself New Member Joined Dec 12, 2010 Messages 101 Mar 11, 2011 #1 is it possible to use 5mm spacers on oem honda wheel studs(EK/EG) with rays wheel nuts?
ek9cub Active Member Joined Oct 22, 2008 Messages 1,062 Mar 11, 2011 #2 I use 3mm with no problems but think 5 maybe a little too big it's worth a try though.
DIY_EK2142 EK Track Car In Prog Joined Feb 26, 2010 Messages 98 Mar 11, 2011 #3 5 is the max you should use with OEM studs, but yeah you arnt leaving very much thread for the nuts to grip on to.
5 is the max you should use with OEM studs, but yeah you arnt leaving very much thread for the nuts to grip on to.
Al-himself New Member Joined Dec 12, 2010 Messages 101 Mar 11, 2011 #4 cool thanks guuys, would you notice 3mm?
Jimbo B18C-R Joined Oct 27, 2010 Messages 3,204 Mar 12, 2011 #5 No! Mainly used for slight caliper clearance issues!
FreakyParts Member Joined May 7, 2010 Messages 845 Mar 12, 2011 #6 I wouldn't go any thicker than 4mm on standard studs as you'll loose the centrebore. Unless you've got aftermarket wheels with a larger bore, then you can stick longer studs in there too.
I wouldn't go any thicker than 4mm on standard studs as you'll loose the centrebore. Unless you've got aftermarket wheels with a larger bore, then you can stick longer studs in there too.
Al-himself New Member Joined Dec 12, 2010 Messages 101 Mar 14, 2011 #7 great, thanks for the advice guys