s300 broke :(


kev_ek9

kev_ek9

Active Member
Joined
Jan 27, 2009
Messages
1,297
bought s300 on here an its damaged anyone know where I can get a 1 day turn around fix on it? basically a few wires seem to not be connected a resistor seems to not be welded to the ecu ynder the s300 board. any ideas? really need help asap or I aint goin japfest
 
Not another faulty S300, seems to be getting quite common.

Cant you just take it to someone local to solder it up.

Dunx
 
Try h-tune for some quick soldering. I can bring it down to japfest if you'll be short on time.
 
one of the resistors seems to have given up taking a black pin with it an also a wire on the board seems to be off. going to go to a place in warrington tomorrow with it hope it can be fixed on site an quick as car needs mapped an MOT before japfest ahhhhh
 
I'd get it tested as well in case something has cause the resistor to give up somewhere in the loom.
 
dhdavectr said:
I'd get it tested as well in case something has cause the resistor to give up somewhere in the loom.
Click to expand...

ye the place i going does tests on the ecu aswel which is good :) hope something good comes out of it as otherwise im guna burn that bloody thing haha
 
Hope it works out and it's just been wear and tear and the resistor gave up !
 
Mine broke as well the red light would stay on . It should go green I think there is some thing wrong with the USB .
 
20130507_180659_zpsea7fa572.jpg


20130507_180705_zps3e299eca.jpg


20130507_180710_zps2bc0e97b.jpg


pics of ecu board looks like r52 has given up an took out the black connector and to left of the end of those black rows the grewn strip that is raised. anyone know if this is an easy fix? or proper foofed
 
If the track has lifted your best off contacting H-tune or somebody else in the uk that has ready supplies of socketed ecu's to suit your s300
 
Darragh said:
If the track has lifted your best off contacting H-tune or somebody else in the uk that has ready supplies of socketed ecu's to suit your s300
Click to expand...

you mean put the hondata board on another ecu base board?
 
Any further with this? What does the underside of the S300 look like?
 
place by me doesnt srock parts for it so buying a standard one so I can run it for japfest an track then sort it :(
 
You must log in or register to reply here.
Back
Top