quarter mile times...


S

stevek

New Member
Joined
Apr 28, 2009
Messages
76
what kind of times do you guys get from quarter miles?? proper timed runs with slips? the quickest ive had from my first day dragging was 14.9@ enniskillen straightliners with a wet track. i want to improve on this obviously so am asking what mods you quicker guys have. my car spec...

b16b
4-1 mani
spec 4 buddy club exhaust
de cat
itg carbon maxogen airbox
orc clutch and flywheel
spoon coilvers
tyres were set to 30 psi.... i now know thats wrong.
launching from 3.5- 4kr pm

14.9 @ enniskillen 09 on wet track
 
you done better than me , i was in the 15's there was no grip . leek9 was setting some good times .
 
14.7 or something like that hard to get grip cant wait 4 it this year
 
On the b16b pretty much stock bar a cat back and open filter I got 15.2 so yours isn't a bad time especially on wet track as you say. Most get around 15.0 mark with basic mods.

On the B18CR with:

DC2 OEM air box with custom air feed in Bumper
Apexi exhaust system
Resonated Decat
Import sprung header
Fidanza 3.4KG Flywheel

Managed a 13.7 on 888 tires with high tire pressure on dry track/cold day. 2.290 60ft which isnt great
 
Last edited:
b16a2
dc sports 4-1 mani
bmc cda
decat/mugen twinloop

14.93 @ crail


cant wait to go back this year :scared:
 
best i could manage was 14.0

and i nearly ripped my clutch apart to get that

r888 on a wet track was a bad idea
 
B16A2
6th. gen. sedan VTi (EK4)
stock engine

15,7 with a bad start...

But now the intake (Simota CAI), the header (Megan Racing 4-1), the manifold (complete EK9) and the cat. OBX converter) is changed.
I going to change the cams too and I will try it the quarter miles in springtime
 
havent tried qm time yet but id think late 14's.
B16a2 with 98 spec integra box
4.7 final drive
short shifter
lightened fly
stage 1 clutch
stripped
bmc induction with cold air feed
5zigen 4-2-1 mani
de-cat
mongoose cat-back
few other wee bits and bobs and
(soon to have itr intake mani)

think il make the trip to straightliners this year to see how i get on
 
I did a 14.0 with just a Mugen catback and a Gruppe M filter. I was using street tyres though!

Probably doing mid 13's now that iv fitted ITB's, an S300 and a 4.7 FD. Going up to 1800cc soon so that should be a bit faster:))

I'll let you guys know how it turns out!
 
evanek9 said:
14.7 or something like that hard to get grip cant wait 4 it this year
Click to expand...

haha we'd a good dice in our last run !:D

hopefully ill make improvements this yr when ill have 888s and maybe a close ratio box and an ecu! was some craic this yr, might head up to the court soon enough to when im home!
 
i got a 15 dead at the pod last year in my previous car which was an EK4 VTi running a full tanabe system and manifold and a v2 intake. Im running a better set up this year in a JDM SiR so im hoping to get into late/mid 14's
 
stevek said:
haha we'd a good dice in our last run !:D

hopefully ill make improvements this yr when ill have 888s and maybe a close ratio box and an ecu! was some craic this yr, might head up to the court soon enough to when im home!
Click to expand...

have the video on my phone of it man:D well i went b18 put in ctr cams spoon leads and mishimoto thermostat 98spec itr box with a cusco lsd and toda flywheel and exedy 3 puk paddle clutch im lookin forward to a bit of racin:nice:
 
evanek9 said:
have the video on my phone of it man:D well i went b18 put in ctr cams spoon leads and mishimoto thermostat 98spec itr box with a cusco lsd and toda flywheel and exedy 3 puk paddle clutch im lookin forward to a bit of racin:nice:
Click to expand...

sweet man! cold ya send me the video?? stekean@hotmail.com?? that be cool! my car is as is. im in new zealand right now having a blast! i think i wanna keep her b16b for awile...like the idea of taking some scalps with a 1600!gear mods and a map will be my next step:drive:
 
On the 99Blackhatch...
B16A
Y21 tranny with GearSpeed carbon coated synchros
A'PEXi N1 catback
Shitty short ram intake
Rota Slipstreams with street tires
Stock header
No chipped ECU
No VTEC controller

No A/C
No power steering
No passenger seat

60' - 2.4 seconds
1/4 mile - 14.8 @ 93 mph
 
Last edited:
I think it's important to add which strip people use to get there times as different strips tend to give slightly different times, for example crail in scotland is on a hill and has the worse surface i've seen on a strip, very hard to get grip off the line, i got a 14.7 at 97mph but i just couldn't get a good launch. did the same strip in my mates 98dc2 and got a 14.5, both running a b18c albeit the ek9 was running the wrong ecu if it makes any difference
 
Best 1/4 mile I got with the Ek sir hatch was 16.03 @ strightliners in Enniskillen, car completely factory stock.
 
I ran a 15.1 @ Santa pod when my car was stock so hoping for alot better this year with my performance parts
 
well i got my time on probably the worst surface imagineable

an uphill airport runway
 
Honda Civic VTi Ferio (EK4)
4.2.1 5zigen Pro Racer man
Custom made B pipe 60mm
Invidia N1
Custom made intake
Custom ECU
Toyo R888

14.8
 
14.0 b18 ek9 with dunlop slicks at santa pod, was a very hot day tho, i wish i had stripped it out too
 
You must log in or register to reply here.
Back
Top