My obd2 scanner results


civic_ej6

boss b
Joined
Sep 9, 2009
Messages
19
this is what showed up on my scanner when i plugged it into my 96 civic...WTF...do i need a new engine?


Basic RepairSolutions®


10/19/2009 6:31:34 AM

Year: 1996
Manufacturer: Honda Canada Inc.
Make: Honda
Model: Civic
VIN #: 2HGEJ6438TH008326
License Plate:
Stop scheduled maintenance reminders
Mileage: 75000
Engine Size: L4, 1.6L; SOHC; MFI
Transmission: Standard
Body Type:
Trim Level: LX
Check your vehicle's: Warranty | Scheduled Maintenance


Diagnostic Trouble Code Information MIL DTC

P0110 LOST COMMUNICATION WITH DRIVE MOTOR CONTROL MODULE


Conditions For Setting This Code:
Possible Causes:
Monitor Information:

Stored Codes

P0100 Mass or Volume Air Flow Circuit


Conditions For Setting This Code:
Possible Causes:
Monitor Information:

P1600 Integrated Motor Assist (IMA) System Malfunction


Conditions For Setting This Code:
Possible Causes:
Monitor Information:

P0120 Throttle/Pedal Position Sensor A Circuit


Conditions For Setting This Code:
Possible Causes:
Monitor Information:

P0115 Engine Coolant Temperature Circuit


Conditions For Setting This Code:
Possible Causes:
Monitor Information:

Diagnostic Information Freeze Frame Information

Parameter Description Value
DTC for which Freeze Frame was Stored P0110
Fuel System 1 Status Open Loop
Fuel System 2 Status Not Supported
Calculated LOAD Value 0.00 %
Engine Coolant Temp -40.00 °F
Short Term Fuel Trim - Bank 1 0.00 %
Long Term Fuel Trim - Bank 1 0.00 %
Engine RPM 0.00 rpm
Vehicle Speed Sensor 0.00 mph
Intake Air Temperature -40.00 °F
Monitor Status

Monitor Name Monitor Icon Status
MIL ON
Misfire Monitor Complete
Fuel System Monitor Complete
CCM Monitor Complete
Catalyst Monitor Not Complete
Heated Catalyst Monitor Not Supported
EVAP Monitor Not Complete
Secondary Air System Monitor Not Supported
O2 Sensor Monitor Not Complete
O2 Sensor Heater Monitor Not Complete
EGR Monitor Not Complete
NMHC Monitor Not Supported
Nox Adsorber Monitor Not Supported
Boost Pressure System Monitor Not Supported
Exhaust Gas Sensor Monitor Not Supported
PM Filter Monitor Not Supported




Additional Information Pre-Diagnosis Worksheet


Describe the Problem
engine light on
List Any Previous Repairs Done in the Past 6 Months
vavle adjustment,performance cam and crank pulley 10mm ignition wires,jdm 4-2-1 exhuast headers.
When did you first notice the problem?
3mths
Problem Occurs
Anytime
Problems Starting Vehicle
No Symptoms
Engine Quits or Stalls
No Symptoms
Idling Conditions
No Symptoms
Running Conditions
No Symptoms
Gasoline Used
91 Octane
 
So why did u plug it in ? Is your engine light on ? Where is the 0bd2 scannin port ?
 
Back
Top