My EK9 Turbo Blyton park


EK9 Matt

EK9 Matt

Well-Known Member
Joined
May 24, 2015
Messages
508
Quick little video from my trackday at Blyton park from 21/5/16. First time the cars been run on track with boost so it was a bit of a shakedown. Also had new brakes and suspension so it was a bit of a learning curve.

Hope you enjoy guys!

 
Wow! You go past the other cars like they just sitting when your on the boost,
Enjoyed watching every minute,
Good job on the car .
 
Thanks guys! I was a little rusty as not driven on track for about 5 years, got there in the afternoon though.

Rough spec is:
B18C4 block, open deck
ITR crank
Rods and pistons
PR3 head
Skunk2 alpha drive train
C4 cams
Racetech turbo kit
TD05 80 series with 20g wheel and modified compressor housing.
External gate with screamer
0.9 bar (spring pressure) is around 350bhp, 1.3 bar 430bhp and 1.5 bar 450bhp.
 
Goes well!
What boost are you running in the video?
 
It's on 1.3 bar there, ran spring pressure most of the day though as it was easier to get traction. Need some proper semi slicks now.
 
I'm running an apexi avcr for boost control, the general rule of thumb is what ever max boost you want to run, half it and that's the wastegate spring to run. If you run a weaker spring it will struggle to make more than double the boost as the pressure will overcome it.
 
Thanks for the ride :nice: I like your driving style. Welcome back to the track.
 
I can't make this Thursday unfortunately:(, been looking at one on the 8th June, think there's one near the end of June too.
 
You must log in or register to reply here.
Back
Top