MeisterR's Fitted


love it, the perfect stance for me, bc coils here i come
 
i've got the exact same coilovers, very good, what settings you got it on? i'm on 13/16 clicks from soft Front/Rear.

I've got my front ALL the way down, and rear set to same height.

you should lower the back to have the level look.

can you get a pic up, it must be slammed if down full on meister R's. cheers:secret:
 
i've got the exact same coilovers, very good, what settings you got it on? i'm on 13/16 clicks from soft Front/Rear.

I've got my front ALL the way down, and rear set to same height.

you should lower the back to have the level look.

that stiff?! got mine on 6-9 rear/front at the moment.
 
looking good mate, do u have any pics of the actual coilovers?
 
wierd i fitted my meisterR's on saturday aswell to my eg5! was an absolute ball ache on the rears as one corner the bolts had seized on the lca! had to saw the bolt off took hours!

I found the meisterR really good actuali, put them on full hard and **** me was it stiff had literally no body roll but had to turn it down as i could feel every single bump!

looking good:dance:
 
looking good mate, do u have any pics of the actual coilovers?

Picture047.jpg


there ya go :)
 
exactly how mine turned up, where did you get them from?

I used the discount offer thats on civiclife so i got them for £499 with del and i ordered them thursday and they came friday!
 
exactly how mine turned up, where did you get them from?

I used the discount offer thats on civiclife so i got them for £499 with del and i ordered them thursday and they came friday!

£499!? :eek:, i payed £550 and ordered them direct from jerrick, turned up next day aswell, good service :)
 
£499!? :eek:, i payed £550 and ordered them direct from jerrick, turned up next day aswell, good service :)

might be because mine are ones for eg civic thou they can be fitted to ek's. thou again ek9 is jdm so will probs have different fitment.

somebody will have to back me up on that.
 
might be because mine are ones for eg civic thou they can be fitted to ek's. thou again ek9 is jdm so will probs have different fitment.

somebody will have to back me up on that.

nope eg/dc match ek is different again
 
ive just bought some miesterR aswell,
Very impressed with the quality ive gone for the Zeta S as a mate was selling some pretty much brand new but for alot less!!, The only difference really is in spring rates, the zeta R have the same back springs as the front Zeta S, and then stiffer upfront, also with slightly harder dampening, but with the adjustments on both there is obv a crossover point where the zeta S and Zeta R meet the same stiffness So im still really happy with them, they are far superior to my old tein superstreets when youre driving it hard, even if you do loose some of the ride comfort. i think my springs are plenty hard enough for now but if i do decide i want it even stiffer i can just buy the Zeta R front springs & put my Zeta S front springs on the back :)
, just realised how much i babbled on....... sorry haha
 
Just saw this and thought I should at least comment on how well the car looks.
I would say get the rear lower a little more also, there is enough adjustment to level out the ride height, but it looks good now. :)

As for some questions about the difference between the Zeta-S and Zeta-R, I thought I let you guys know as sometime it did get a bit confusing.

Zeta-S:
Spring Rate: Front: 8.0kg/mm, Rear: 6.0kg/mm
Aluminum Top Mount with Harden Rubber Bush

Zeta-R:
Spring Rate: Front 10.0kg/mm, Rear: 8.0kg/mm
Aluminum Top Mount with Pillowball Bearing
Damper valving also been increased slightly to suit

Do give the dampers about 2-3 weeks to fully bed in...
Once that happen the damping will feel softer and you will have better control over the damping range. :)
 
thanks jerrick, getting geometry setup done next week so will get them to sort the ride height out then i think, i can definately feel the coilovers have bed in now, have also fitted some 50 profile tyres yesterday which look better imo :)
 
Back
Top